+ Reply to Thread
Page 22 of 26 FirstFirst ... 2121314151617181920212223242526 LastLast
Results 211 to 220 of 254

Thread: Tapping in Broome County?

  1. #211
    Join Date
    Aug 2007
    Location
    NewYork
    Posts
    195

    Default

    Another great old USA made tool. The crimping dies should go on the shaft before the beading dies so it makes a shoulder after the crimp. You can use just the crimping dies or just the beading dies if you make some spacers. These machines would have come with the spacers when new but they usually get lost over the years.

  2. #212
    Join Date
    Aug 2016
    Location
    whitney point NY
    Posts
    151

    Default

    ---the-spacers-did-come-with-it-----put-them-in-safe-place-as-not-to-get-lost-----and-have-located-a-slip-form-roller-for-a-real-decent-price

  3. #213
    Join Date
    Aug 2007
    Location
    NewYork
    Posts
    195

    Default

    If you don't have one already keep your eye out for a Genuine made in USA Beverly shear. They make cutting metal so easy and they will last forever if cared for.

  4. #214
    Join Date
    Aug 2016
    Location
    whitney point NY
    Posts
    151

    Default

    ----picking-up-the-sheet-metal-roller-in-the-morning-------Got-word-from---Bagderland-Maple-works-----pan-is-done-and-shipped-this-morning---should-be-here-Monday

  5. #215
    Join Date
    Aug 2016
    Location
    whitney point NY
    Posts
    151

    Default

    ----Here-is-the--sheet-metal-roller------NiagraDSCN1720.jpgDSCN1721.jpg-----got-it-for-$250----normaly-around-here-they-go-at-$600-any-way

  6. #216
    Join Date
    Aug 2016
    Location
    whitney point NY
    Posts
    151

    Default

    DSCN1729.jpgDSCN1730.jpgDSCN1732.jpgDSCN1728.jpg---the-pan-came-this-morning---Realy-nice-----just-have-to-put-ceramic-gasket-under-it---they-are-a-realy-nice-place-to-deal-with!DSCN1731.jpg
    Last edited by Buddy 58; 09-14-2020 at 12:40 PM.

  7. #217
    Join Date
    Aug 2016
    Location
    whitney point NY
    Posts
    151

    Default

    DSCN1644.jpgDSCN1731.jpg------Before---and----after!

  8. #218
    Join Date
    Apr 2011
    Location
    Fayston, Vt
    Posts
    122

    Default

    Why do you want 2 evaporators and what else are you going to put on it?
    Is this a pre heater for the other?
    2020 same
    2019 RB10 26 taps
    2018 RO Bucket RB5 taps 20, leg tank in shed w/2 5/16
    2017 18 taps
    2016 20 taps
    2015 21 taps
    2014 30 2 gravity line, 2 hotel pan concrete arch 35 g leg tank
    2013 LP hook up in shack buckets 12 taps
    2 burner cook top 2012 finisher on a bbq tanks
    2011 rookie 2+ gal
    8 taps w/ milk jugs
    turkey cooker
    50-60 up back maybe

  9. #219
    Join Date
    Aug 2016
    Location
    whitney point NY
    Posts
    151

    Default

    ---this-small-2x4-is-for-cooking-off-my-3x10-at-end-of-sason----instead-of-using-propane-----it-was-one-of-my-first-evaps---sold-it-to-a-guy-who-never-used-it---took-a-long-time-to-get-it-back-----its-not-the-first-time-of-having-two---there-was-a-time-a-3x8-sat-next-to-the-3x10-----they-were-piped-together---if-you-dont-have-a-ro----more-boiling---sap-gose-quicker----I-have-made-some-of-my-lightest-syrup-running-two-at-a-time----piped-together---the-2x-4--will-make-some-one-a-nice-back-yarder-or-a-young-pup-to-start-with-when-its-time-to-retire-from-it

  10. #220
    Join Date
    Apr 2011
    Location
    Fayston, Vt
    Posts
    122

    Default

    Thanks for replying, confirmed what I thought with more details.
    2020 same
    2019 RB10 26 taps
    2018 RO Bucket RB5 taps 20, leg tank in shed w/2 5/16
    2017 18 taps
    2016 20 taps
    2015 21 taps
    2014 30 2 gravity line, 2 hotel pan concrete arch 35 g leg tank
    2013 LP hook up in shack buckets 12 taps
    2 burner cook top 2012 finisher on a bbq tanks
    2011 rookie 2+ gal
    8 taps w/ milk jugs
    turkey cooker
    50-60 up back maybe

+ Reply to Thread
Page 22 of 26 FirstFirst ... 2121314151617181920212223242526 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts