DSCN1697.jpgDSCN1698.jpg-----Finnised-the-base-stack-this-morning-----If-there-is-any-one-in-my-area-that-needs-a-arch-redone---I-would-be-glad-to-work-with-you----!!!!!
 |
 |
 |
 |
 |
 |
DSCN1697.jpgDSCN1698.jpg-----Finnised-the-base-stack-this-morning-----If-there-is-any-one-in-my-area-that-needs-a-arch-redone---I-would-be-glad-to-work-with-you----!!!!!
Last edited by Buddy 58; 08-18-2020 at 05:40 PM.
Looks real nice.
Dr. Tim Perkins
UVM Proctor Maple Research Ctr
http://www.uvm.edu/~pmrc
https://mapleresearch.org
Timothy.Perkins@uvm.edu
----Thanks-Dr.-Timhttp://mapletrader.com/community/newreply.php?do=newreply&p=385834Originally Posted by DrTimPerkins
Looks great, that arch will last a lifetime if kept dry.
I think the brake you may have been thinking yours was is a Cornice truss brake made in Buffalo. They made them out of a combination of wood and steel for years then went to all steel.
I love old USA made equipment, you will be able to use it as long as you want and then sell it for a profit as long as you keep it dry.
-----I-found-lettering-on-it----on-the-tighing-handle---round-part-----Dreius&krump--Chicago---NO.8
DSCN1703.jpg---Got-it-moved-to-the-sugar-house-today---
Not sure what make it is, but that brake looks exactly like the Brake my local tin shop uses. Theirs is a 10 or 10.5' I believe. They have a 3' table directly behind it to support larger sheets. Back in the 90's I used it a lot in my furnace business. The owner at that time was the grandfather of the currant owner. Gramps loved to talk and had loads of wisdom to take in. The only problem was when I needed to get something done quick it took about 60-90+ minutes to get out. He died in 2010 at age 80, about 2 years after going into semi-retirement. Up until about 1 month prior to his death he still worked for 2-3 hrs each morning at the shop.
Dave Klish about 400 taps, down from much more. Retired from collecting and boiling in 2021. Mostly because of a bad hip.
2012 Mahindra 36 HP 4x4/ loader/cab/heat/AC:-)
3x8 raised flue evaporator
250 GPH converted to electric, RO by Ray Gingerich
6.32 KW solar system, 1.48KW is battery backed up, all net metered
website: www.cnymaple.com
-----Ordered-the-pan-this-morning----From-Badgerland-mapleworks---who-is-owned-by---Smokey-lake-mapleworks-----will-be-two-weeks-anyway--they-have-to-biuld-it----was-on-phone-with-them-----special-order-------3-feet--117/8--inch
DSCN1716.jpgDSCN1717.jpg----Look-what-I-found---Its-a-sheet-metal-crimper---and--beader----made-by--Niagra--M&T-works--for--Peck-&-Stow-----for--putting-the-crimp-in-stove-pipe-----just-need-to-find-a-sheet-metal-slip-form-roller---at-a-decent-price-------expecting-word-on-the-pan---if-they-hold-true-to-there-word----
Nice find. Keep your fingers away from the business end.
Dr. Tim Perkins
UVM Proctor Maple Research Ctr
http://www.uvm.edu/~pmrc
https://mapleresearch.org
Timothy.Perkins@uvm.edu
Posting Permissions
Reply With Quote
