DSCN1684.jpg[ATTACH-------two-pieces-clamped-together----exactly-the-same-size------lets-see-what-magic-can-happen-next---haha
DSCN1684.jpg[ATTACH-------two-pieces-clamped-together----exactly-the-same-size------lets-see-what-magic-can-happen-next---haha
I was referring to the dog, it looks a lot like my german short hair.
2004 - 2012 2x3 flat pan 25 to 60 taps
2012 2x3 new divided pan w/draw off 55 taps
2018 - didn't boil surgery - bought new evaporator
2019 new SML 2x4 raised flue high output evap. 65 taps
made 17 gal. syrup
2020 - only put out 53 taps - made 16.25 ga.l syrup
2021 - Didn't work out
2022 - 25 taps on bags / 8 taps on 3/16's line - late start
------getting-my-own-sheet-metal-brake--if-plans-go-good-gonna-pick-it-up-saturday-morning-----that-is-how-I-will-finnish-base-stack----
Attachment 0----got-the-brake-moved-home-this-morning------every-thing-went-good------DSCN1691.jpg
------Its-a-8-16----very-good-shape---It-was-in-Pompey,NY----I-am-in-Whitney-Point-NY----about-an-hour-away------there-is-no-tag-on-it---but-I-belive-its-a-Cornish--made-in-Buffalo,NY
Looks like a Chicago, I have an old Chicago 818 and the legs and castings look exactly the same. The Chicago's have a round brass tag with a single rivet in the center located on the right side casting near where the clamping pivot is. Many times they are gone but usually the rivet hole is there.
-----there-is-no-rivet-or-rivet-hole-where-one-would-be-------I-miss-spoke-when-I-said-it-was-a-8-16--------the-guy-who-I-got-it-from-said-it-would-bend-16-gauge---thanks-for-your-input
----It-is-a---(Chicago)---found-lettering-on-it-at-the-tighting-levers--around-the-round-part-of-it------must-be-before-they-used--rivet-and-tag
DSCN1694.jpgDSCN1695.jpgDSCN1693.jpg------almost-done-with-baes-stack----got-to-get-some-stainless-rivets-and-round-out-the-bottom-a-little