I am in need of a large bender releaser jar! Mine just cracked! If anyone has one they would sell me please let me know!!! I have all the guts!
I am in need of a large bender releaser jar! Mine just cracked! If anyone has one they would sell me please let me know!!! I have all the guts!
Awfully thankful for an understanding wife!
“The only place success comes before work is in the dictionary.”
- Vincent “Vince” Lombardi
Good luck to all!
Might be time to start measuring and figuring out a pvc solution they can be hard to come by
11x29 sugarhouse
2x8 airtight arch homemade with waterloo flue pan, welded syrup pan and parallel flow preheater hood
250gph cdl ro
1100+ taps for 2014, approx 1000 of them vac
https://www.facebook.com/pages/Crowh...5582993?ref=hl
Tcross..check with some of your old farms in the neighborhood...they are out there. I would give you the one I had but sold it two seasons ago to a Maple Trader member. If I hear of one in my neck of the woods I will let you know. Look on Craigslist or E-Bay.
Bob- 4 x 12 Small Bros. Lightning w/raised flues-open pans
20 x 40 sugarhouse, all tubing-main line to sugarhouse
1400+- for 2011 & 100% vacuum
Polaris 500 HO w/Tatou 4s Tracks
1 Chocolate Lab from TEXAS
What is the diameter? I know they made different ones?
Keith
I'm not sure as to what the diameter is? It's a large one! not the little skinny type! it's pretty much a big ball! if I had to geuss I'd say it was 16"-18" in diameter?! probably held 3 gallons? I did end up caving in and bought a hobby releaser! however when I add another 300-350 taps next year I'm going to need another releaser! so I'm still on the search for the glass jar! I have a few people locally on the look out for one! a few dairy supply shops I know in town! if anyone hears of one I'd be interested!
Awfully thankful for an understanding wife!
“The only place success comes before work is in the dictionary.”
- Vincent “Vince” Lombardi
Good luck to all!
Ok I looked and I have a bender releaser that I don't use that is about 5" in dia,
Keith
Thanks for looking Brookledge! the one I had was quite a bit large in diameter! may work with the same parts?? I think i'll wait and try to find a larger jar! but I seriously do appreciate you checking into it for me!
Awfully thankful for an understanding wife!
“The only place success comes before work is in the dictionary.”
- Vincent “Vince” Lombardi
Good luck to all!
I have a fish bowl type jar that I don't use anymore, if thats what your talking about. The top and bottom of the receiver attached to the "bowl" . I don't even know where it is off hand, as I didn't like it very well. I think maybe what you are talking about might not even be this one. I know I looked at a large bender one time and the guy wanted 300 dollars for it, I left it there. If I do some hunting, I may be able to find his phone number if your interested?
Mark
Where we made syrup long before the trendies made it popular, now its just another commodity.
John Deere 4000, 830, and 420 crawler
1400 taps, 600 gph CDL RO, 4x12 wood-fired Leader, forced air and preheater. 400 gallon Sap-O-Matic vacuum gathering tank, PTO powered. 2500 gallon X truck tank, 17 bulk tanks.
No cage tanks allowed on this farm!
Thanks Mark, but if he still wants $300 for it i'll pass! I paid $250 for the entire bowl and all the parts! so I'd guess the glass bowl/jar itself would only be $100?
Awfully thankful for an understanding wife!
“The only place success comes before work is in the dictionary.”
- Vincent “Vince” Lombardi
Good luck to all!
I think you will find the glass part is pretty expensive if you find one, the reason being that many have been broke over the years whereas the other parts are much harder to break of course, so the jars are kinda pricey and of course they arnt making them anymore!
11x29 sugarhouse
2x8 airtight arch homemade with waterloo flue pan, welded syrup pan and parallel flow preheater hood
250gph cdl ro
1100+ taps for 2014, approx 1000 of them vac
https://www.facebook.com/pages/Crowh...5582993?ref=hl