+ Reply to Thread
Page 3 of 3 FirstFirst 123
Results 21 to 22 of 22

Thread: Sugar Shack and metal roof

  1. #21
    archangel_cpj Guest

    Default 1/4 x 1/4 hardware cloth

    Im pretty certain that if you had 1/4 x 1/4 or even 1/8 x 1/8 hardware cloth on the pipe the amount and size of the cinders would be well below what would cause a issue remember modern shingles have a pretty good fire retardent built in and a few cinders ought not be a huge issue especially if you screen and have the pipe high enough.

  2. #22
    Join Date
    Mar 2006
    Location
    bangor n,y
    Posts
    184

    Default steam

    when i built my sugar house i put my evap right undr the cupalo but i made my ceiling low i went with a 5/12 pitch write or wrong you tell me? so anyways from the top of my pans to the peak is only about 7 feet. i had a 3x12 so i made my cupalo 8 ft long and 2 ft wide got some drips but only when the air seemed heavy outside or a swirling wind and thats all i used was strapping and tin. my sugar house faces n-s and the wind blows from the west 90% of the time.they also make box fans that are water proof at wally world for 10 or 20 buckshang them in your cupalo at an angle if you need to if get drips works good for my buddy!


    4x12 oil fired
    1,450 on tubing
    farmall A ,3 kids and a good wife for the gathering

+ Reply to Thread
Page 3 of 3 FirstFirst 123

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts