Anyone build their own autodraw off?

[Amber Gold]

My probe has three different colored wires...red, white, and I think blue. I assumed the blue is the second red wire when I wired it. I did get a temp. reading, just in the 1200F range at room temp. If I remember correctly, if I set it to P100 or P10.0, I got EEEE's across the screen.

The manuals are confusing to the inexperienced. I think I was wiring it so J1 activated the buzzer. I pulled a hot line from the PID to the buzzer, and connected terminal 5 to the other terminal on the buzzer. Does 1, 4, and 14 need to be jumpered together? My power source is 120V if it makes a difference. Outy is set to 1.

Thanks