+ Reply to Thread
Results 1 to 9 of 9

Thread: 2nd Annual Maple School- Tilton NH October 26th, 2013

  1. #1
    Join Date
    Aug 2006
    Location
    Andover NH
    Posts
    2,074

    Default 2nd Annual Maple School- Tilton NH October 26th, 2013

    Here is a link to the brochure.

    http://extension.unh.edu/events/file...163981B3D8.pdf

    You can register online- follow the link on the flyer.

    Same lunch option as last year. Lots of vendors committed to being there as well.

    Very good turnout last year for the 1st Annual NH Maple School. Hope to see more of you all there this year.

    Let me know if you have any questions-

    -Eric
    Eric Johnson
    Tucker Mountain Maple Co-op
    1400 taps in 2013
    2.5 x 8 CDL pellet arch and Smokey Lake pans
    Lapierre 600 RO
    Member of Andover/Salisbury Maplehaulics anonymous
    www.tuckermtn.com
    pALS

  2. #2
    Join Date
    Aug 2006
    Location
    Andover NH
    Posts
    2,074

    Default

    Greetings all- wanted to let folks know that the deadline to register (if you want to reserve a lunch) for the

    2nd Annual NH Maple School is this Saturday, the 19th.

    Location: Tilton, NH at Winnisquam Regional High School.

    Registration and trade show start at 8am, program starts at 9am.

    You can walk in and register that day, but you will not be able to get a lunch.

    To register online, follow this link: https://www.events.unh.edu/Registrat...event_id=15631

    for the brochure, follow this link: http://extension.unh.edu/events/file...163981B3D8.pdf

    Send me a PM with questions...

    -Eric
    Last edited by tuckermtn; 10-15-2013 at 07:22 PM.
    Eric Johnson
    Tucker Mountain Maple Co-op
    1400 taps in 2013
    2.5 x 8 CDL pellet arch and Smokey Lake pans
    Lapierre 600 RO
    Member of Andover/Salisbury Maplehaulics anonymous
    www.tuckermtn.com
    pALS

  3. #3
    Join Date
    Aug 2006
    Location
    Andover NH
    Posts
    2,074

    Default

    Here is the outline for the day.

    Sat. Oct 26th - Winnisquam Reg. High School


    8:00 Registration and refreshments and visit with vendors

    9:00 Ensuring Quality in the Food Making Process - Ellie Valentine, Butternut Mountain Farms

    9:30 - 10:15 (Session 1)
    -Lateral/Roadside Lines on Gravity – Dave Butler, Leader
    -Maple Cream – Ben Fiske, Ben’s Sugarhouse & NHMPA Board of Directors
    -Tapping tools and techniques – Keith Wakefield, CDL USA
    -Vacuum Pump options – Glenn Goodrich, Goodrich Maple Farms

    10:30 - 11:15 (Session 2)
    -Making 500 taps work for you - Eric Johnson, Tucker Mt. Maple & Josh Bouchard, Spring Harvest Maple Farm
    -Maple Candy – Ben Fiske, Ben’s Sugarhouse & NHMPA Board of Directors
    -Reverse Osmosis – Speaker TBD
    -Voluntary Guideline for Maple Producers - Ellie Valentine, Butternut Mountain Farms

    11:30 - 12:15 (Session 3)
    -High Vacuum with Gravity Tubing - Tim Wilmot, UVM Proctor Maple Research Center
    -Connecting with Your Customers using the Web - Kelly McAdam, UNH Cooperative Extension
    -Sugarbush Management – Steve Roberge, UNH Cooperative Extension
    -Updates from the NH Dept. of Agriculture, Markets & Food – Victoria Smith & Janice Conner, NH Dept. of
    Agriculture, Markets & Food

    LUNCH - To be guaranteed lunch, please register by Oct. 19

    1:15 – 2:00 (Session 4)
    -High Vacuum with Gravity Tubing - Tim Wilmot, UVM Proctor Maple Research Center
    -Identifying and sampling off flavors in syrup - Ellie Valentine, Butternut Mountain Farms
    -Filtering syrup - Chris Pfeil, The Maple Guys
    -Bottling best management practices – Bill LaPort, Artisan Printing of Vt., Eric Johnson, Tucker Mountain Maple

    2:15 -3:00 (Session 5)
    -Boiling Concentrate - Glenn Goodrich, Goodrich Maple Farms
    -Vacuum releasers & maintenance – Lapierre Rep.
    -Sugarbush Health – UNH Cooperative Extension Forester
    -Backyard/Beginner maple syrup production – Steve Roberge, UNH Cooperative Extension
    Last edited by tuckermtn; 10-17-2013 at 04:29 AM.
    Eric Johnson
    Tucker Mountain Maple Co-op
    1400 taps in 2013
    2.5 x 8 CDL pellet arch and Smokey Lake pans
    Lapierre 600 RO
    Member of Andover/Salisbury Maplehaulics anonymous
    www.tuckermtn.com
    pALS

  4. #4
    Join Date
    Aug 2006
    Location
    Andover NH
    Posts
    2,074

    Default

    Update on schedule-

    Rejean Laverdiere, the designer of the Force 5 from Lapierre, will be taking the time-slot at 2:15 that was previously announced as a releaser maint. and trouble shooting seminar. Tom Patterson from Lapierre will take any questions on releasers at the Lapierre table anytime during that day.

    Again, you can still register online (see link above) and at the door, you will just need to do lunch on your own.

    Looking forward to a good maple day this Saturday...

    -Eric
    Eric Johnson
    Tucker Mountain Maple Co-op
    1400 taps in 2013
    2.5 x 8 CDL pellet arch and Smokey Lake pans
    Lapierre 600 RO
    Member of Andover/Salisbury Maplehaulics anonymous
    www.tuckermtn.com
    pALS

  5. #5
    Join Date
    Apr 2014
    Location
    Wakefield,New Hampshire
    Posts
    505

    Default

    Quote Originally Posted by tuckermtn View Post

    Let me know if you have any questions-

    -Eric
    This is interesting but couldn't find anything for 2014/15 Will this be happening again?

  6. #6
    Join Date
    May 2009
    Location
    UVM Proctor Maple Research Center, Underhill Ctr, VT
    Posts
    6,420

    Default

    Quote Originally Posted by NhShaun View Post
    This is interesting but couldn't find anything for 2014/15 Will this be happening again?
    The NH Conference will be on October 18th this year. Don't know of any other details.
    Dr. Tim Perkins
    UVM Proctor Maple Research Ctr
    http://www.uvm.edu/~pmrc
    https://mapleresearch.org
    Timothy.Perkins@uvm.edu

  7. #7
    Join Date
    Jun 2012
    Location
    Gill, MA
    Posts
    27

    Default

    Where is the registration for this conference. I would like to send the topics to the ISA for possible continue ed credits if I were to attend.

  8. #8
    Join Date
    Aug 2006
    Location
    Andover NH
    Posts
    2,074

    Default

    Greetings all - Dr Tim is correct in that we are planning the 3rd Annual NH Maple School for Saturday, October 18th at Winnisquam Regional High School in Tilton, NH.

    Still working on details for the workshops, but we will be following last years format very closely.

    So consider this a "SAVE THE DATE" notice.

    Cheers -

    Eric Johnson
    Eric Johnson
    Tucker Mountain Maple Co-op
    1400 taps in 2013
    2.5 x 8 CDL pellet arch and Smokey Lake pans
    Lapierre 600 RO
    Member of Andover/Salisbury Maplehaulics anonymous
    www.tuckermtn.com
    pALS

  9. #9
    Join Date
    Apr 2014
    Location
    Wakefield,New Hampshire
    Posts
    505

    Default

    Great!! It is marked in my calendar , thanks a bunch! Looking forward to this.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts