image.jpg
1in square stock
1 1/4in square stock
1/2in course threaded rod
1washer
3nuts
2 3/4 coupler
2 1in coupler
2 1 1/4 in coupler
image.jpg
1in square stock
1 1/4in square stock
1/2in course threaded rod
1washer
3nuts
2 3/4 coupler
2 1in coupler
2 1 1/4 in coupler
Jake Moser
Moser's Maple
2 beautiful little girls
1 wife that's become her mother
www.facebook.com/mosersmaple
image.jpg
1 in stock 18 in long
1 1/4 in stock 16 in long
Weld nuts to stock and rod
Jake Moser
Moser's Maple
2 beautiful little girls
1 wife that's become her mother
www.facebook.com/mosersmaple
image.jpg
Weld couplers together
Jake Moser
Moser's Maple
2 beautiful little girls
1 wife that's become her mother
www.facebook.com/mosersmaple
image.jpg
Weld couplers to 2 9in vise grips
May have to grind off nose of vise grips for a better fit
Jake Moser
Moser's Maple
2 beautiful little girls
1 wife that's become her mother
www.facebook.com/mosersmaple
image.jpg
Weld vise grips to square stock., add a angle support and crank handle and you have a new mainline tool
Jake Moser
Moser's Maple
2 beautiful little girls
1 wife that's become her mother
www.facebook.com/mosersmaple
Real nice tool Jake. The thing that always prevented me from buying a mainline tool is you can't buy one that has 1, 1 1/4, and 1 1/2 inch. It's these three sizes that I need. The price on these tools is crazy.
Spud
Looking good Jake, you may have trouble with lateral deflection when using the smallest size, that's why the store boughts nest the sizes together. Spud, I don't remember where I got mine but it does 3/4, 1, 1.25 and 1.5.
Andy's Own Maple
Andy Kinter (4th + generation maple producer)
Approx 790 taps on vacuum
3x10 nat. gas fired raised flue small bros.
600 gph Lapierre RO
Fine collection of used bulk tanks
Kubota MX5100 sap hauler
2 hives (that I don't spend enough time on)
A great family that works together to make syrup!
https://www.facebook.com/pages/Andys...27718203945398
http://photobucket.com/mapleack
Lapiere makes one. I bought one from them a couple of years ago that goes from 3/4" to 1 1/2". The jaws are interchangeable so it doesn't stick out so far. You unscrew a wing nut and put the size you want in. All the jaws are mounted on the tool so you don't loose them.
Thanks guy's I will buy one next time I am in Swanton. I had no idea they had one with all those sizes.
Spud
I looked, Pruno makes it, Lapierre sells it.
Andy's Own Maple
Andy Kinter (4th + generation maple producer)
Approx 790 taps on vacuum
3x10 nat. gas fired raised flue small bros.
600 gph Lapierre RO
Fine collection of used bulk tanks
Kubota MX5100 sap hauler
2 hives (that I don't spend enough time on)
A great family that works together to make syrup!
https://www.facebook.com/pages/Andys...27718203945398
http://photobucket.com/mapleack