+ Reply to Thread
Results 1 to 2 of 2

Thread: Co op universal vacuum pump

  1. #1
    Join Date
    Mar 2010
    Location
    Sandstone, Minnesota
    Posts
    483

    Default Co op universal vacuum pump

    Just picked this up from a dairy barn at the neighbors. Still runs fine. Has anyone one used one like this and what can I expect in vacuum?
    I may just turn around and sell it.
    Any info would be helpful.
    Thanks.
    WoodsmanImageUploadedByTapatalk1349551685.143164.jpg
    Scarlet Jewell Sugar Shack LLC
    Sandstone, MN 55072
    16 x 24 sugar shack
    crescendo auto drawoff,

    Home built ro with a Dow xle 4040 membrane.
    1 1/2 hp motor on 220 drawing 8 amps
    Gravity feed


    300 taps on vacuum

    2 x 6 Smokey Lake Corsair arch with blower and pans and preheater
    1529 Massey Ferguson, Yamaha Wolverine

    https://www.facebook.com/ScarletJewellSugarShack

    Instagram. Mapleshack

    http://www.youtube.com/watch?v=AOnmFMBgU10

  2. #2
    Join Date
    Mar 2007
    Location
    NE Pa
    Posts
    2,209

    Default

    How many taps are you using it on? I think you might be surprised what it does. Its a piston pump and it might be as much as 5 cfm looking at the head. You may be able to run 20 inches on 3 or 400 taps just guessing without knowing the rating. Theron

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts