+ Reply to Thread
Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18

Thread: Rule of 87 or 86

  1. #11
    Join Date
    Jan 2007
    Location
    Bristol , VT
    Posts
    215

    Default

    Post # 7 had the correct answer . When the syrup brix was changed from 65.5 to 66.9 , the rule of 86 became the rule of 89.2 ! If anyone will make the syrup and do the math , you will be making the amount of syrup you should , using the rule of 89.2 . All of your "shrinkage" will disappear , with the right formula !
    If it were easy , everyone would be doing it !!!

  2. #12
    Join Date
    Nov 2008
    Location
    Adirondacks
    Posts
    2,786

    Default

    I made mostly 70-72 brix xsyrup this year. I like it heavy so do my customers.
    FIRST GENERATION SUGARMAKER
    First boil 2/22/2012! Went Pefect!
    3,500' of laterals
    1,000' of mainline
    2012 - 105 taps on gravity, 12 sap sacks.
    2013 - 175 taps on gravity, 25 on sacks = 200 taps for 2013! Second year.
    2014 - 250 taps on gravity, 25 on sacks
    Tapped on February 16, 2014
    2015 - adding vac sap puller no more gravity for me!
    275 gallon holding tank for 2014
    20'x30' Sugarhouse

  3. #13
    Join Date
    Feb 2010
    Location
    Milan Qc
    Posts
    551

    Default

    Quote Originally Posted by adk1 View Post
    I made mostly 70-72 brix xsyrup this year. I like it heavy so do my customers.
    It is illegal to sell syrup over 68°brix, and call it syrup...at least in Québec
    200 Buckets 2015
    14 x 16 Cabane à sucre
    2 x 5 Cantin evaporator

  4. #14
    Join Date
    May 2010
    Location
    Athol, NY
    Posts
    219

    Default

    When you exceed 68 brix you are creating a supersaturated sugar solution, i.e. some of the sugar will crystallize as it returns to a balanced concentration. That is why you get sugar crystals in the bottom of a container when you make your syrup to dense.
    Last edited by ToadHill; 03-29-2012 at 11:34 AM.


    Randy

    Toad Hill Maple Farm

    http://ToadHillMaple.com/

    3650 Taps on Vacuum for 2010 & still expanding
    56'x64' Timberframe Sugarhouse - New for 2011
    3x10 Leader Vortex w/ Max Flue Pan & SteamAway
    1000 gph Leader Springtech RO
    777 Acres in the Adirondack Mountains

  5. #15
    Join Date
    Nov 2006
    Location
    South Lincoln,vermont
    Posts
    1,802

    Default

    The best rule of thumb is to boil it down to 66.9 and measure how much you have, it is never wrong. LOL
    Success is not final,failure is not fatal.It is courage to continue that really counts

    “I have not failed. I’ve just found 10,000 ways that won’t work.”

    – Thomas Edison

  6. #16
    Join Date
    Mar 2010
    Location
    Kalamazoo, MI
    Posts
    99

    Default

    Taken from the OMAFRA Fact Sheet for measuring syrup density:

    The density of maple syrup is a measurement of the percentage of dissolved solids, which includes sugars and minerals. However, sugar accounts for about 98% of the dissolved solids in the syrup. Therefore, by measuring the density as a reading of dissolved solids, a reasonably accurate estimate of the percentage of sugars in the syrup can be made.
    Taken from the Wiki for Brix:

    Degrees Brix (symbol °Bx) is the sugar content of an aqueous solution.

    One degree Brix is 1 gram of sucrose in 100 grams of solution and represents the strength of the solution as percentage by weight (% w/w) (strictly speaking, by mass). If the solution contains dissolved solids other than pure sucrose, then the °Bx is only approximate the dissolved solid content.
    And later in the same source:

    When a sugar solution is measured by refractometer or densitometer, the °Bx or °P value obtained by entry into the appropriate table only represents the amount of dry solids dissolved in the sample if the dry solids are exclusively sucrose. This is seldom the case...In such cases the °Bx value clearly cannot be equated with the sucrose content but it may represent a good approximation to the total sugar content.
    Syrup that is measured at 66 Brix is 66% sugar, which is a weight-to-weight comparison. A 100oz solution would contain 66oz of sugar. A gallon is 128oz so there are 84.5oz of sugars (.66 x 128 oz) in a gallon of maple syrup.

    Density compares weight/volume. Sugars account for only 98% of the dissolved solids in syrup and density measures all the dissolved solids, so 84.5/.98= 86.2oz of dissolved solids in a gallon of maple syrup. That, I believe, is where the rule of 86 came from.

    If you adjust for 66.9% Brix, it becomes the rule of 87 (.669 x 128/.98 = 87.4).

    The link below contains a table that lists the amounts of sucrose at different degrees Brix.

    1 Brix has 1.002grams of sucrose
    2 Brix has 2.012grams of sucrose
    3 Brix has 3.030grams of sucrose
    12 Brix has 12.558grams of sucrose
    66 Brix has 87.280grams of sucrose

    So its easy to see that happy thoughts was correct about the math not holding for higher concentrations of sugar.

    http://www.boulder.nist.gov/div838/S...able%20114.pdf
    Tracy

    2011 - 3 gal syrup
    2012 - 4 gal syrup
    2013 - 14 gal syrup

  7. #17
    Join Date
    Apr 2009
    Location
    castle creek ny
    Posts
    228

    Default

    this stuff makes my brain hurt so im just gonna keep makeing syrup the way ive allways done it and leave all this scientific stuff to the smart people!!!!

  8. #18
    Join Date
    Jul 2009
    Location
    Groton, Vermont, United States
    Posts
    61

    Default

    Maple sugar is not exclusively sucrose though, glucose is also present in much smaller quantities. Might that affect the accuracy of the Brix scale as well?
    25,000 on vacuum.
    6x16 Leader oil fired with steam-away.
    H2O Supra 8 RO
    34 x 44 Sugarhouse.

+ Reply to Thread
Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts