+ Reply to Thread
Results 1 to 8 of 8

Thread: CDL Pennsylvania Grand Opening

  1. #1
    Join Date
    Nov 2005
    Location
    smithville flats ny near binghamton
    Posts
    600

    Default CDL Pennsylvania Grand Opening

    I just recieved an invitation to CDL Penn. Grand Opening. Does anybody know if this is going to be a facility run by CDL or is it a dealer? Does anybody have any information on this new facility other than it is CDL. I sure hope it's a full service facility, it's a lot closer to me than northern Vermont.
    shrunken producer, from 8,000 taps to 4,000 to 5800 to 9500 to 11,000 vac
    5x16 woodchip fired evaporator with 5x10 max flue and 5x6 revolution front pan
    CDL 20+ RO
    Double 10"filterpress

    sp-11, bb2, airtech L63, L160, L230 vac pumps
    CDL low profile electric releaser
    MES 8000 electric releaser
    CDL 4000 tap mechanical releaser

  2. #2
    Join Date
    Dec 2006
    Location
    NE PA (Pocono's)
    Posts
    1,417

    Default

    where is it?
    Algier 2x6
    Around 2500 taps
    Polaris ATVs, Ski Doo snowmobiles to get around
    Atlas Copco, Surge SP-22 pumps
    Lapierre 600 RO




    http://s272.photobucket.com/albums/j...Sugar%20shack/

  3. #3
    Join Date
    Mar 2009
    Location
    Troy,PA
    Posts
    414

    Default

    The new CDL store will be at Richard Patterson's (Patterson's Maple Farms). From what he told me back at there open house it will be a fully stocked store with someone from CDL managing it. I also think the original plan was to have it up and running by fall so they could run seminars over there this fall.
    Scott
    2017
    7,000 high vac taps
    6x16 leader evap
    2200 GPH Lapierre Turbo RO
    2400 GPH Springtech RO
    To many tanks to count


    www.waysidemaplefarms.com
    http://s1116.photobucket.com/albums/k578/waysidemaple/

  4. #4
    Join Date
    Dec 2007
    Location
    Polk, PA
    Posts
    1,363

    Default

    There was an ad in Maple News. I believe there was a date for the grand opening. Early - mid September. I'll PM them and see if Linda is "watching".

    Patterson's are on here. His name is Sugarmaster. If you go to the member list, there is a www link to his web site. You can get directions off of it.
    Last edited by Gary R; 08-23-2011 at 01:05 PM. Reason: Additional info.
    136 on high vacuum for 2019
    A&A 2X8, raised flue evaporator
    hood, parallel flow pre heater and air over fire
    12X28 sugar shack

  5. #5
    Join Date
    Nov 2005
    Location
    smithville flats ny near binghamton
    Posts
    600

    Default

    the letter I received says that the Grand Opening will be Sept. 8-10 2011, 8-4:30.

    91 Patterson Road, Westfield, PA (sorry no zip code on letter and the original envelope went away with the trash)

    RO seminars Fri. and Sat. @ 2:00
    Tubing seminars Fri. and Sat. @ 10:00

    Refreshmants and Door prizes
    SPecials on everything in store
    CDL specialist on site (not sure if that means just for the Grand Opening or for the life of the store)


    1-800-762-5587 for more information
    shrunken producer, from 8,000 taps to 4,000 to 5800 to 9500 to 11,000 vac
    5x16 woodchip fired evaporator with 5x10 max flue and 5x6 revolution front pan
    CDL 20+ RO
    Double 10"filterpress

    sp-11, bb2, airtech L63, L160, L230 vac pumps
    CDL low profile electric releaser
    MES 8000 electric releaser
    CDL 4000 tap mechanical releaser

  6. #6
    Join Date
    Sep 2007
    Location
    N.C. Penna. Tioga Cty Sabinsville
    Posts
    45

    Default

    Hello To all Fellow Maple Producers..Yes the cat is out of the bag.. The new CDL Pennsylvania Super Store is opening here at PATTERSON FARMS on September 8th 9th & 10th. It has been a long month getting the new building up and finished, but I think we will make it. I am going to try and answer some of your questions...lew - Yes it is a store run by CDL, one of our helpers here has been hired to manage the store but Linda and I will still be selling for them. It will be stocked with a large inventory alot more then we had here at the sugar house so we hope there wont be the waiting for items we didnt have. It opens at 8 am to 4:30 pm all three days. RO seminars will be held Friday and Sat at 2 pm and tubing seminars Fri and Sat at 10 am. The CDL specialists will be here all three days and my own RO wiz Kid is here to help out too. Evaportors, ROs, and some of the small equipment will be up and running so you can really see what it does!. We are all very excited about this new super store and invite all of you to come visit and see what we have to offer. If you have any questions or need directions you can call here at the sugar house at 814-628-3751 or the main office at 800-762-5587.
    Also if I can get someone to help me I would put a picture of the new building up LOL?? Maybe Theron???
    I am a 3rd generation maple producer, with 80,000 taps & 28 sugar bushes.
    2 evaportors, 6x16 & 5x16 Water/Loo Small Turbos
    2 ROs, 1 2400 gph & 1 1800 gph
    2 10" filter press full banks
    Sap Tanks rangeing from 600 to 6000 g
    (Hired Boys says "All numbers subject to change" Ha Ha)

  7. #7
    Join Date
    Nov 2005
    Location
    smithville flats ny near binghamton
    Posts
    600

    Default

    Thanks sugarmaster, hope to see you there.
    shrunken producer, from 8,000 taps to 4,000 to 5800 to 9500 to 11,000 vac
    5x16 woodchip fired evaporator with 5x10 max flue and 5x6 revolution front pan
    CDL 20+ RO
    Double 10"filterpress

    sp-11, bb2, airtech L63, L160, L230 vac pumps
    CDL low profile electric releaser
    MES 8000 electric releaser
    CDL 4000 tap mechanical releaser

  8. #8
    Join Date
    Jan 2009
    Location
    Dunvegan, Ontario
    Posts
    977

    Default

    Quote Originally Posted by Sugarmaster View Post
    Also if I can get someone to help me I would put a picture of the new building up LOL??
    Maple Trader has attachments limited to a maximum file size of 97 kilobytes so you will need to resize your photo smaller until it's less than that. To add an attachment reply to this post as you normally would but before clicking the submit button scroll way down. You will find a link to "manage attachments". That link will open a new box which will let you upload to Maple Trader. When your upload(s) are completed scroll down again and click Close Window. When you post your photo will now be included.

    On another note, as soon as your new web site mentions that you are also an equipment dealer I will add a second listing on Sugarbush.Info for you to the US dealers section. Nice job on the web site redesign!

    - Bryan

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts