air flow
I recommend covering the intake sides of the blower housing. If you have some scrap sheat metal around try cutting it larger than the blower opening . Cut a slot in the middle of the covers large enough for the shaft. Use a self tapping screws to attach the covers in place. try and see where the best place to screw the covers buy testing them. You can completly cover one side and play with the other side. What ever works. Don't worry this will not hurt the motor or the blower, actually you will reduce the amps the motor will draw less air = less amps.
Last edited by jd maple; 03-10-2011 at 10:38 AM.
Reason: does' matter
Homemade oil tank rig
60 taps
old john deere tractors and sleds
good times had by all
Reply With Quote