Began tapping today. First 200 are in. Only one broken CV.
Began tapping today. First 200 are in. Only one broken CV.
Brian Ryther
Mill Hollow Maple
10,000 taps
3 Liquid Ring Vac Pumps
5x14 Leader Vortex Evap
Lapierre 2000 RO
http://s186.photobucket.com/albums/x3/brianryther/
The next 200 are in and only one more broken CV.
Brian Ryther
Mill Hollow Maple
10,000 taps
3 Liquid Ring Vac Pumps
5x14 Leader Vortex Evap
Lapierre 2000 RO
http://s186.photobucket.com/albums/x3/brianryther/
350 more for today. As expected one broken cv per day. Had a few southern facing show some trunk sap. Gave up installing the new ro in "factory condition." Found the pre filter installed backwards from the factory. That gave me licence to start tearing it all apart and put it back together the way the works best for me. Fun.
Brian Ryther
Mill Hollow Maple
10,000 taps
3 Liquid Ring Vac Pumps
5x14 Leader Vortex Evap
Lapierre 2000 RO
http://s186.photobucket.com/albums/x3/brianryther/
Tear it up Brian!!
2 1/2 x8 Lapierre Waterloo-Small (oil fired)
Leader Steamaway
1200 gph Lapierre RO
1800 taps
http://s268.photobucket.com/albums/j...ks/Sugarhouse/
Mike Christian
505 Main St. Orwell, Vt.
No broken spouts today! O yea didn't tap today.
Brian Ryther
Mill Hollow Maple
10,000 taps
3 Liquid Ring Vac Pumps
5x14 Leader Vortex Evap
Lapierre 2000 RO
http://s186.photobucket.com/albums/x3/brianryther/
Go gettum Brian. Keep us guys just north of you up to date on sap flow. Thanks!!!
Danno
Just West of Syracuse
3 x 10 Lightning
Sihi Vacuum
Sap Bros RO
600 taps and buying sap
Another 250 in today. No broken CV's!
Brian Ryther
Mill Hollow Maple
10,000 taps
3 Liquid Ring Vac Pumps
5x14 Leader Vortex Evap
Lapierre 2000 RO
http://s186.photobucket.com/albums/x3/brianryther/
Almost halfway there Bryan. Go get them
Brian---Did you get that RO torn apart yet??
2 1/2 x8 Lapierre Waterloo-Small (oil fired)
Leader Steamaway
1200 gph Lapierre RO
1800 taps
http://s268.photobucket.com/albums/j...ks/Sugarhouse/
Mike Christian
505 Main St. Orwell, Vt.
Mike,
I took the feed pump off and turned it around so that it faces the feed tank. I figure that if I keep it mounted to the frame it won't vibrate like you said yours does. I took the 5 micron filter and mounted it above the wash tank. I am considering buying another so I can change filters on the fly. I have yet to remove the MCC/FC panel and mount in the wall, but I bet I will do it before next season. FWWebb was the best price for the 20" filters. $4.00 ea when you buy a case vs $5.00 from the maple suplyers. I will post some pics when it is all done.
Brian Ryther
Mill Hollow Maple
10,000 taps
3 Liquid Ring Vac Pumps
5x14 Leader Vortex Evap
Lapierre 2000 RO
http://s186.photobucket.com/albums/x3/brianryther/