Search:

Type: Posts; User: wiam

Page 1 of 20 1 2 3 4

Search: Search took 0.04 seconds.

  1. Thread: Oil Conversion

    by wiam
    Replies
    21
    Views
    498

    20949 I suggest an inspection hole so you can...

    20949

    I suggest an inspection hole so you can see the flame pattern. Mine is a 3” hole centered above the burner with a steel plate with one bolt. Bolt is loose enough so plate can swing out of...
  2. Thread: Oil Conversion

    by wiam
    Replies
    21
    Views
    498

    Bottom of pan to center of burner is 16”. But I’m...

    Bottom of pan to center of burner is 16”. But I’m not sure where I came up with that number. I had to adjust my burner to be pointed up slightly at the pan and tried a bunch of different...
  3. Thread: Oil Conversion

    by wiam
    Replies
    21
    Views
    498

    Looks like 702 has one nozzle and pressure is...

    Looks like 702 has one nozzle and pressure is increased for hi fire. 701 has 2 nozzles. And runs one on low fire and two on high fire with no pressure increase.
  4. Thread: Oil Conversion

    by wiam
    Replies
    21
    Views
    498

    Lot of info here....

    Lot of info here. https://www.leaderevaporator.com/pdf_files/leader-insulated-oil-arch.pdf I would call these starting points. I have a Carlin 701 on my 3x12. 2-5.5 gph hollow 80° nozzles running...
  5. I use a cordless. (Already owned it). Tool is...

    I use a cordless. (Already owned it). Tool is expensive. Put a short piece of plastic pipe over the drill bit for a stop.
  6. Think that depends on the probe. I used one for...

    Think that depends on the probe. I used one for many years while running 1600° stack in my 2x6. I’m still using that probe in my 3x12 oil fired. Wish I could tell you how to get one. Other than eBay...
  7. Replies
    4
    Views
    347

    Are they food grade?

    Are they food grade?
  8. Thread: Evaporator

    by wiam
    Replies
    2
    Views
    626

    Lot of good info here....

    Lot of good info here. https://www.leaderevaporator.com/pdf_files/leader-insulated-oil-arch.pdf I would use this for a starting point. On my homemade 3x12 arch I went with bigger nozzles than they...
  9. Here are some pics from my $20 camera. Black and...

    Here are some pics from my $20 camera. Black and white are taken in complete darkness (infrared) one of releaser dumping is a screenshot taken by camera in motion detection. When I had it set up...
  10. Replies
    50
    Views
    11,905

    I have had to tear mine down and use hot water to...

    I have had to tear mine down and use hot water to get the sugar build up out of the check valves.
  11. Replies
    12
    Views
    637

    Google “uniseal” I use them everywhere. Between...

    Google “uniseal” I use them everywhere. Between cage tanks. Work very well adding ports to releaser so also.
  12. My hotspot is from Straighttalk. Device was...

    My hotspot is from Straighttalk. Device was around $50. 4 gig and 60 days cost $45.
  13. Replies
    11
    Views
    500

    $6 cheaper from MES

    $6 cheaper from MES
  14. I use this camera,...

    I use this camera, https://www.ebay.com/itm/720P-WIFI-Wireless-Pan-Tilt-Security-IP-Camera-CCTV-Night-Vision-Security-Cam/333186146238?pageci=4e1c35b7-8c93-41a5-b2a5-8c5b316b728d with a hotspot and...
  15. Replies
    2
    Views
    254

    Bought one from MES several years ago. Cost about...

    Bought one from MES several years ago. Cost about $1000 then.
  16. Replies
    10
    Views
    1,307

    The way Corny kegs are made they will not hold a...

    The way Corny kegs are made they will not hold a vacuum. So long term not refrigerated storage could be a problem. I use them and store them in a freezer. They would work fine for transporting.
  17. Replies
    4
    Views
    421

    View Post

    On 2 of mine I used a 1/8” bit in a “dremel” and made a groove around the joint. Basically cleaned out old glue. Then I cleaned it with pvc pipe cleaner and filled with heavy duty clear pvc pipe...
  18. Thread: Drum bung caps

    by wiam
    Replies
    4
    Views
    391

    Last ones I got were plastic.

    Last ones I got were plastic.
  19. Replies
    6
    Views
    753

    Been really happy with these. I have one pointed...

    Been really happy with these. I have one pointed at my RO. Can read flows and temp. You can turn camera from your phone to look at tanks or whatever. I also have one at my woods with a hotspot to...
  20. Replies
    3
    Views
    810

    Hardest part will be starting the motor. Not sure...

    Hardest part will be starting the motor. Not sure if that generator is quite big enough
  21. Replies
    3
    Views
    1,256

    We make sure ours stay in the shade.

    We make sure ours stay in the shade.
  22. Replies
    26
    Views
    2,558

    DON’T. The company name is new. Product used to...

    DON’T. The company name is new. Product used to be called Onduline. “Lifetime” guarantee. Then they “went out of business” before you can collect. Does not last more than 15years before it starts...
  23. Replies
    9
    Views
    1,399

    I have a WiFi switch. Brand name “sonoff”. I plan...

    I have a WiFi switch. Brand name “sonoff”. I plan to hook it to a relay to turn my pump on/off from my phone.
  24. Replies
    21
    Views
    3,347

    Same here. Except I use CV1

    Same here. Except I use CV1
  25. Replies
    16
    Views
    2,037

    Are you talking 10-2 with ground or 10-3? ...

    Are you talking 10-2 with ground or 10-3?

    https://www.wireandcableyourway.com/10-2-w-ground-uf-b-underground-feeder-wire-125-500-or-1000ft-coil.html
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4