Search:

I have a two stage high pressure pump I use to push sap up a 100ft rise about 6-700 ft long and pushed 20gal per minute tthrough a 1inch line Sold the business still have the pump 5.5hp briggs engine...

Russ as you know your RO was the same as mine and the best way to get the cup over the O ring is to grease with food grade grease and put a 4 inch hose clamp on the o ring and slide the cup on while...

Sorry to hear about your luck Russ.I,m too old to find suprizes like that ! I,ll leave it you guys Hope the rest of your year goes much better


Jim

MERRY CHRISTMAS AND A HAPPY NEW YEAR

From NW PA
Jim

You can buy 32oz deli cups w/lids for around 30cents At wesellcoffee.com in NJ we used this product for many years
Jim

Just a FYI guys not a good idea to tap the same trees in the fall that you plan on tepping in the spring ! Really hard on the trees

Jim

Look for another piece that has just female threads
Jim

Looks like it may be part of an old vice

Most times they are paying with a stolen credit card You send the product and the card number is bogus.

Back to the bullet proof thing. Last season I had a releaser freeze up and pulled sap through the moisture trap and filled the pump.We shut everything down, drained all the sap from the lines and the...

I am by no means an expert but I have had a number of years using 2565 v2v Gast pumps I Used 2 hooked parallel on 1000 taps and was able to hold 23-24 inches .I was told by a person who uses them...

Drill a tiny hole at the END of both cracks and then proceed to repair The small hole will Stop the crack from going any farther and what ever you chose to repair with will hold

Jim

Natural RO !

I ran 2 gast 2565 v2v with 1 1/2 hp dayton motors on 220 volts , My gen was also 5500 watt Pramac They would both run but the gen was not big enough to start them both

Had to start one then the...

I ran 2- 2565 v2v gast pumps on 1100 taps and could hold 22-24 inches GREAT Pumps. Ran them on 220volts on a 5500 watt pramac generator

A word to the wise.DO NOT CALL IT MAPLE PEPPER there is a place in Maine that has a copyright on the name(go figure) we recieived a letter from there lawyer

I understand that if you start adding this and removing that the price will change but what is wrong with putting a base price on a piece of equipt and say includes this, this and this. All others...

Thanks Chris we hope to see you at LEME again soon
JIm

Thanks Russ we will be in your area again at some point. will look you up for sure, Not sure how the Parkinson's will progress but will travel as long as I can
Jim

It is with a little reluctance at I inform the Maple Trader that Browns Pure Maple Products has been sold. Due to some health issues we found that it was in our best interest to sell .Please welcome...

Lets get a look at it!!

I have a 2x6 with 7inch raised flues. Steamaway and forced draft ,no air tight arch and when we get up to temp we do about 55 gph We run8% concentrate to the steamaway and get 10-11% to the flue pan...

Supposed to get wicked cold middle to end of next week. We will tap after the next cold spell
Jim

And Cheep also!!

Get a Stanley qt thermos Take out the screw in plug replace it with a real cork and drill a hole in the cork the same size as 5/16 tubing. Fashion a sling and through it over your shoulder Fill with...