5/16? What type of tap are you using? What size mainline?
Type: Posts; User: KReinisch
5/16? What type of tap are you using? What size mainline?
Hey folks!
Just wondering what you all are getting per tap. I have roughly 2000 taps and all of them are on vacuum. I pull anywhere from 24-26 inches of vacuum. This year we pulled an an average of...
How do you unscrew?
Anyone ever take apart a lapierre free standing 4 inch tower. The bearing went bad in mine and I want to do myself.
I have a lapierre and it is great. Everything comes apart and it is super easy to clean.
Anyone know prices on them? I saw them at the conference last year and liked them.
So you can just push tubing onto it with out tool?
Who uses them? Pros and Cons... worried about the 45 degree angle and tubing tool.
Im looking at a used 30X8 lapierre with a volcano oil fired arch. It has a hood and preheater. What would be a good boiling rate for this rig.
I use a solution that calls for 1 cup of solutions for 5 gallons of water. So I mixed up 10 gallons and let it circulate through the ro for a bit.
I ran preservative through my ro. Should I drain it or just let it be like it is.
I am thinking I need higher concentration. I would love to get 1.5 gpm of 12-15%
I always process right away. I will eithetr have to get another post or do the circulation thing.
I rinse every night and I have soap washed every other use.
I have a springtech 600 with a 7.5 hp upgrade. I had a brand new membrane in there this year and Im wondering if I should have been able to get more from it. I was taking 2% to 10% at around 1.5 gpm...
Going to boil one more time in southern Albany county. I have one cold woods that is still going.
Does anyone know the volume of a BHR double releaser rated for 1000 taps?
I figured out that is was the a tight gas cap on the auxiliary tank I made for it. Thanks for the replies.
I have a two week old airblo with honda engine.. it was running like a top and just yesterday, it quit out of the blue twice. Any suggestions?
The airablo unit i just bought is already set up at half throttle. they have a set screw that only allows you to go so far. I can go 24 hours on 5 gallons of gas.
It varies in distance and I run a 4008 on 225 taps. I think the most important part is that the last tap or pump is lower than the furthest. I have a scenario on my one woods that is just gravity...
If you are using 3/16 the shurflo will pull sap up hill with a good tight system. I have some spots where I need to over trails about 7 feet and it has no problem.
The sap tank is level with the ro. There is about 6 feet of pipe with one elbow. I dont thing flow is an issue.
Thank you and I have already done plenty of cursing.
Its level with the RO.