If you still have pics can you email to me beerayfarms@gmail.com
Type: Posts; User: BeeRay Farms
If you still have pics can you email to me beerayfarms@gmail.com
I’ve got a massport m5 that needs a rebuild, I was able to find a parts kit for it, but have never done one.
Anyone in Southern Michigan or close to 48158 that still works on these?
Thanks
...
Maple crest,
Did you setup a splitter tank this way? Did it work well?
Have an opportunity to pickup a rebuilt M5 pump for a song but has no reclaimer or cooler just pump head.
Would probably assemble as a gas powered unit (11hp Honda) on a small trailer. Anyone ever...
I have a single vertical mechanical I was planning on using for this. Was thinking of making something like a 4" pvc type "moisure trap". I have heard of some folks using a 10 or 15 gallon portable...
Thanks for this advice. Next question, do I need any sort of vacuum tank, or will the moisture trap be adequate on the inlet side? If I understand right some guys use a portable air tank between the...
So what is your recommendation in terms of the muffler? I have an idea for a moisture trap.
Guys,
Have one woodlot with about 300 taps that I think a little gast 1550 I have (new old stock) would do ok on. At very least it would be as good as buckets we have done on it and be less...
We get them from a guy who handles bulk animal feed. Came from Cargill and had sugar beet syrup in them which is what they often use now to sweeten feed, if you have a feed mill in your area a good...
Jrthe3 who did you have do the re solder job?
Crack is completely through all way through top. It's only the front that's cracked, not the doors.
I'll try and get pics tomorrow in daytime
I have a leader arch front that has cracked this season, crack goes from the top of left door opening all way to top between the "E" and the "R". I put a pipe clamp across as a way to hold it...
Been loving the boiling on my new to me pleasure model and using the plug sure does help...
Hi,
Anyone have the standard per tap lease price and or going price per gal sap is worth at given % (brix)?
Location is Southeast MI, for upcoming 2016 season.
Thanks
We built our own plate/ collar on 4x12 setup at my fathers almost 25 years ago now and it held up well. Used 3/8 plate steel base. Had a ring rolled from 1"X 1/2" stock to match the sides of taper...
I have used it on homebrew equipment and it works well, however it takes hot water and more of it than PBW which is made to be free rinsing. Make sure you use the original unscented kind..
Folks,
Been a long time since I boiled on a leader drop flue on a wood fired rig but I used to years ago with my father. Many good memories there. Anyway I am trying to remember how the front...
54 taps in. All on buckets/ bags. Northeast Ann Arbor, some flow yesterday, got about 22 gallons. Ran it into half pint rig last night and started to sweeten. Not really running much yet, hoping for...
Barrel boiler,
How did you accomplish the bending out of the drum?
Figure this as good a place as any to ask. Looking to build a small syrup pan around a 24x33 size. I know the compartments in commercial pans are typically bent up, then together and then rivited/...