Search:

Thank you Bassman.

Bassman,off topic but I had a question after reading your shack construction thread. Did you use the Selkirk Supervent for your stack
and if so how’s it holding up for you? Thanks.

Syrup looks great! You using the bucket filters?
I purchased some after seeing your post on them, syrup showed cloudy
after filtering. { 3 prefilters than orlon }

Thanks Dave, will follow thru on your suggestions. Did a bit of research,the hdpe is good upwards from 230-240 degrees,
so I feel it will be fine. Good luck with the health issues your taking on,...

Is there any concerns using these as my filter tower? I guess specifically will the hot syrup
temps affect the plastic as we will filter at 219 degrees. Thank you to Swingpure for making me aware of...

Mol, any warping on your stack plate and how thick is it? Thanks.

SuperSapper, thanks for the input.I am leaning toward going thru the top as you suggest. As it so happens I will have one pan 18x34x6 and a full size steam pan I used this year on a block arch for...

Thanks for the input Dave. The arch will be angle iron, nice and square hopefully. I do plan on the rear firebox wall being bricks up to approx. 3" from pan bottoms then maintain the 3" distance from...

Shaun, early plans are to use 2x2x3/16 angle iron for framing the arch, wanted the 2" to accommodate splits ( 1.25" ) plus Roxul/Rockwool batts (1.5") behind the splits in the firebox. This may...

Thanks for the input Mol and Shaun!

I am in the planning stages for an arch build for next season. My flat pan ( no dividers) will be 18x34x6.
I am using the pyromatic plans found on this site, a few questions:
Since the arch is...

Thanks to all for the feedback, looks like I'll be welder shopping!

18x34x6 flat pan,I had the same worries using unistrut,was looking for opinions from others.
This hobby does bite you hard,may have to take the plunge on some tools. Thanks for the reply and time.

Don't have a welder or metal working tools, was wondering if unistrut could be used for a small
2x3 arch? Thanks for any feedback yea or nay.

Nice design! I'm new to the forum, live in the Western New York area. Could you explain how you secured the insulation to the barrel walls? Thanks!