Thank you for your help.
Type: Posts; User: Bmeehan19
Thank you for your help.
Bump for today
Tapped 36 yesterday in Berlin at around 3:30. Had about 10 gallons by 5:30. My first year on tubing!
So I picked up a shallow well pump and it is rated for 10gpm. Now that will be significantly more than my RO will he processing. My procon is rated for 4gpm but when it’s pressurized and recirculated...
Awesome! Thank you! You try so hard to get all this as perfect as you can and having no experience to tell me how it’s going to work is driving me mad!
Looking for some insight here. This is my first year running tubing, 3/4” mainline and 5/16 tubing. Where my laterals meet the mainline I am using the union with the hook and then a loop to the...
Thank you for the replies. I am torn between the shurflo and a shallow well pump for the reasons you describe. If I added a sort of bypass before the prefilter from the feedpump I could essentially...
I have a procon 240gph pump feeding my 4x400gpd membranes. I will have a recirculating line. What can/should I use for a feed pump. I know since I will be recirculating I won’t be actually flowing...
I do agree the first membrane gets clogged quicker but it won’t bottleneck the system. The concentrate sides are all open to each other so flow should still move, you will just have less permeate...
Thank you for the response. I am more refering to what looks like a threaded adapter to the sight tube coming out of the ball valve. I kinda looks like a separate part, but it not be. It seems to...
Hi,
Trying to make a sight tube and I don’t know what to call this fitting. Does anyone know or have something similar? Thanks in advance.
20398
I know nothing about secondary air tubes etc.. Fir the cement and brick I just assembled them together like a brick wall, didn’t use any behind the bricks. With the shape of the barrel walls it...
What are most people using for a feed pump? I’ve been looking at shallow well stainless pumps but they vary quite a bit. Any tried and true options?
Ok. Thank you. Now Inhave to find a bracket for that. Does one exist?
SonI bought a Dayton 1hp 56c to run my pump. It arrived yesterday, It doesn’t have a mounting base to sit the motor on. I’ve searched for bases and can’t find anything. Any suggestions on how to...
So I’ve had a difficult time locating the adapter to go from procon clamp to 56c. A couple places listed it but it was out of stock at $75-$90. I came across Kleen-Rite and located the clamp to 56c...
Thanks for the adapter number. I have been searching just wasnt sure on the motor as they all have different descriptions. I prob made it more complicated than it is.
I have not. I will look into it. Thanks.
I just picked up a 240 procon pump. I have been reading here and see I need a 48y frame to be able to clamp directly onto the pump but they o love you go to 3/4. Ive read a 1 hp pump will better suit...
It will take a bit to bend and weld it all but I promise. I will post pics. Thanks for everyone’s input.
I have a “kinda” plan based on a couple years of reading through this site. I am planning on a 18x30 in drop flue pan. With 2 dividers (3 sections) running front to back. Then taking off the right...
I just used the refractory cement and it cures nice and tight. The insulation isnt that compressible so it has held up very well in mine. I don’t go slamming wood in either but it’s very durable. The...
Awesome! Thank you for the reply. I will probably only have 6-8% concentrate. I will figure out the dimensions.
From what I gathered, there is no reason for firebrick outside of the firebox. The brick has no insulating value, they help retain heat for a high temp combustion chamber. You should still insulate...
Good morning. Im upgrading my barrel arch this year. It is fire bricked with insulation behind it, it has a ramp to force the fire and heat up to the pans and a blower under the ash grate. The ramp...