Search:

Type: Posts; User: Brian

Page 1 of 14 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    2
    Views
    280

    I would run the mainline up the hill the 200 ft...

    I would run the mainline up the hill the 200 ft and be done.
  2. Replies
    10
    Views
    1,183

    I have a system with a 1 1/4 wet and a 11/2 dry...

    I have a system with a 1 1/4 wet and a 11/2 dry and run 2500 taps on it with no problems.I have 18 main lines coming off that.9 main lines to the right and 9 to the left.Glenn Goodrich laid it out.
  3. Replies
    11
    Views
    1,198

    I run a 4x12. I have a 6 gallon nozzle on low...

    I run a 4x12. I have a 6 gallon nozzle on low fire and a 7 gallon on high fire. The pump pressure is 145 p.s.i. that makes it about 15 gallons of oil an hr. I run 20-23% concentrate. After the pans...
  4. Replies
    16
    Views
    2,202

    Yes you will we run electric box heaters , they...

    Yes you will we run electric box heaters , they are around 35.00-45.00 dollars. we use the cords with the thermostat built in to then because we have hade the thermostats that are built in fail and...
  5. Replies
    10
    Views
    1,187

    The cement around the legs will break easy. The...

    The cement around the legs will break easy. The tanks are calibrated for the farmer and dairy co. the cement will brake up with little effort. The legs turn and are adjustable. I use a 5 pound hammer...
  6. Replies
    7
    Views
    1,742

    So if it says sugar added, I believe people will...

    So if it says sugar added, I believe people will add sugar to get more out of their syrup. And it won't be against the law. This will be fun!!
  7. Replies
    4
    Views
    560

    they made them like that back in the 80's but...

    they made them like that back in the 80's but didn't take hold. I don't really know what the problem was. Some put them in on the sides too.
  8. Replies
    6
    Views
    825

    The gallon rating on a nozzle is based on 100...

    The gallon rating on a nozzle is based on 100 psi. pump pressure, not 150 psi.
  9. Replies
    4
    Views
    560

    What William is talking about is making the heat...

    What William is talking about is making the heat or fire ball pass under the flue pan through a seperate channel under the fluepan,come up under the front pan then pass through the flues. This would...
  10. Replies
    6
    Views
    825

    https://www.leaderevaporator.com/pdf_files/leader-...

    https://www.leaderevaporator.com/pdf_files/leader-insulated-oil-arch.pdf This should get you in the ball field.
  11. Replies
    36
    Views
    4,464

    I run the smartrek system 1.5 miles the way the...

    I run the smartrek system 1.5 miles the way the crow flies and it works good. I have a repeater at my garage. My cousin Thad came up and we played around with his system here and it worked, so down...
  12. Replies
    14
    Views
    1,852

    If the holes line up,could you use roll pins to...

    If the holes line up,could you use roll pins to hold it in place? They are hollow so oil could go through.
  13. Replies
    14
    Views
    1,852

    Is the key way twisted off between the pulley and...

    Is the key way twisted off between the pulley and shaft? Or is the shaft twisted off next to the drum? Check those things. Good luck.
  14. Replies
    12
    Views
    2,092

    I haul sap with 2 f250s, they both have 500...

    I haul sap with 2 f250s, they both have 500 gallon poly tanks in them. If it weren't for mud season I would have 735 gallon tanks in them.You know what they say about 3/4 ton trucks, they will handle...
  15. Replies
    12
    Views
    1,972

    I believe Leader switched to non lead solder in...

    I believe Leader switched to non lead solder in 92. I had a set of 1993 Leader 30x8 pans that said lead free on them.
  16. Replies
    22
    Views
    2,343

    That makes sense. good luck!!

    That makes sense. good luck!!
  17. Replies
    22
    Views
    2,343

    Spud, How did you make out?

    Spud, How did you make out?
  18. Replies
    22
    Views
    2,343

    you should be fine. I have the water cooled ...

    you should be fine. I have the water cooled kinneys, one is 7.5hp the other is 5hp so I didn't know how tall your reclaimer was. You could use hydrolic hoes for your oil lines.
  19. Replies
    22
    Views
    2,343

    I would leave the oil line in the lower reclaimer...

    I would leave the oil line in the lower reclaimer hole. 1 the colder oil will drop to the bottom and 2 there will be less turblence in the bottom to get air in the system to cause air lock or mess...
  20. Replies
    22
    Views
    2,343

    Try flushing it out with diesel fuel. let it run...

    Try flushing it out with diesel fuel. let it run for a few minutes drain and put in new oil. The water and oil may have put slim in the pump so the oil won't circulate.This might clean the crap out.
  21. Replies
    22
    Views
    2,343

    The kinney pump is way diffrent than the Osr. Osr...

    The kinney pump is way diffrent than the Osr. Osr are single stage and the kinneys are two stage pumps.
  22. Replies
    6
    Views
    722

    Soot is unburned fuel, most pans will soot up on...

    Soot is unburned fuel, most pans will soot up on start up do to the liquid being so cold. The heat source has to over come this. If you find soot on the bottom of your pan the heat source is not hot...
  23. Thread: 2018 Bulk Price

    by Brian
    Replies
    207
    Views
    51,898

    Those are his. He leased the land for 30 years....

    Those are his. He leased the land for 30 years. He will have 4 evaporators running at once when done. They got about 50,000 done in Eden for this year. that makes about 80,000 for him this year.
  24. Replies
    16
    Views
    2,189

    I let The water run through the front pan all...

    I let The water run through the front pan all night.
  25. Replies
    16
    Views
    2,189

    Every night when I get done. I run spring water...

    Every night when I get done. I run spring water through my front pan and it cleans the niter right out. If you don't have water like that, some people recirculate water with a tank and a submersible...
Results 1 to 25 of 339
Page 1 of 14 1 2 3 4