Search:

Anyone have an updated price list for a&a they can post?

the problem isn't removing sap it is the tap hole itself and what is called ringing a tree which is putting so many holes in a small tree that it cant grow fast enough to allow the tree to heal while...

andrew i am with hobs the procon pump will handle what you have and more if you can return the filters then maybe move to the 4x40 (filter and vessel about 400$) if not run all the filters you have...

thanks for the reply's doc yea ive been reading a lot about the plugging issues even with just the shavings from the tapping process and maple yea could make drops at the house using hot water and...

hey maple my understanding with zap bac taps you could stay 3/16 even with the drop thus elimanating the need for two different size lines and the special tees correct? and pls sorry for the...

are you using 3/16 or 5/16 to tap below lat or does it matter

ok how about this one dave what about a 60 to 80 psi feed pump (sprinkler pumps often run that psi) to supply volume put a check vaulve in and use an 8800 to supply the psi i understand some of the...

ok so i wouldnt be able to sell wholesale then? 2x8 will make to much syrup and i will find the taps somewhere not to sell some that way

so on 3/16 im good to 25ish taps per lat with minimum slope and vacuum what if i brought that to say a 5/16 minimum slope main?

cedar thanks for the input if i run just 3/16 i would have runs of 5 or 6 hundred feet i thought you were supposed to keep them under 100 ft and less than 25 taps on vacuum with no grade i dont know...

yea cj the numbers look about right

hey guys leader used lead solder until when 91/92 ? found a decent price on a 2x8 but the flue pan was made in 89 if i have to replace flue pan the price isnt that great and it is really a little...

so i think next year i got a new bush about 120 taps relatively flat with about a 3foot deep ravine running about 30 40 foot off center and about 400' length.overall size of the lot is about 350x550...

eustis22 you save the permeate from what u ran though it the time before

daveb yes you want to rinse the membranes do not use city water as the chlorine will hurt the membranes differing opinions on well water some say once a year is no biggy some say use distilled water....

daveb sorry for hyjacking your thread

is there a reason the guys doing vac are using shurflo's and the guys doing ro are using aquatec do the aquatic not have the vac or durability or what i think they are a little higher in output psi...

i was more wondering if they all work to catch sugar like some 4x40's will pass some sugar at any psi some wont some are better than others because they work quicker at lower pressures so i guess the...

dave i was just curios if it was a specialty ro cartridge like the xle or if any one would work based on gpd

just a curiosity ? you use a 400 gpd membrane does it matter which one i mean i gathered parts for a 4x40 and i use the xle but is there a special 400 gpd membrane you guys use

ok haynes my way leaves you with a scratched up pan but maybe next to the last resort LOL NEVER TRIED YOUR WAY it dont sound good

cordless drill and a wire cup as a last resort

ok russ thanks for the input

restriction on the concentrate side is what forces the sap through the membrane in most ro's there are flow meters and pressure gauges that tell you what to set it at to get what you want ie less...

hey russ think it would give me 10/12 gph of concentrate taking half the water out and if i had a raised tank do you think i could pull sap through the pre filter and push it through the xle if i...