Search:

Hi All, Hope everyone had a good sapping season. What I'm looking to find out is two things. First off on a 4x40 membrane can it be used both directions? What I mean is can you move the seal to the...

Adding a 150 gpd won't help you much as far as gpd. Your 100gpd membranes will only let at best 100gpd through them so it wouldn't matter if you added a 150 in front of or after your existing...

I don't know if it was right or wrong but I broke mine in with well water and then flushed the crap out of it with the permeate that I made from the well water. I ran 100 gal of sap through it a week...

I put in 174 taps today all hooked to vacuum. Only about half of my trees dripped when drilled. The rest are bone dry. I fired up the vac pump but had a hole out on a line. Looked like a critter...

That's what I was after. Thanks !

I may have worded that wrong. What I meant was what actually is the soap and what is the acid and what's the best place to get it? JoeJ mentions citric acid. O.K. I got that now what is the soap?...

Hi All,
What is the soap and acid used for membrane cleaning?

Thanks for the replies and the good info. I did find that the pumps vary a lot with some research. I am running a rig I made up with 3 - tw30 1812 membranes and it works awesome but it's too slow. I...

That is the part I don't know. Are most of the procon carbonator pumps roughly the same gph or ??? Don't know much about them.

Hi All.
I'm wondering if I used a procon 250psi pump and 1 - 4" x 40" membrane how many gpd can I do?
Thanks for any input.

I was out in the woods today also. You are right on the wind. Made it feel cold. Started up 38 taps on lunchbox vacuum to see if they would go. Sucked out a little but very little. While running I...