Got help today from the local de laval dealer. All these head aches from using 1/16 cork gasket. It was too thick.
Type: Posts; User: Rodshobbies
Got help today from the local de laval dealer. All these head aches from using 1/16 cork gasket. It was too thick.
I got a de Laval 73 awhile ago and finally got it hooked up today. It's not making any vacuum .what can cause this. I have taken it all apart and cleaned it. All the veins are floating free. I have a...
I figured its time for an up date .gave up on the ro for 2017 and went for it again in 2018 . After lots of reading and getting frustrated I starting increasing the pressure to the membrane and holy...
Boiled 200 gallons of sap on Saturday. Hopefully lots more to come. Any chance anyone close to central nova Scotia running a guzzler pump that I can pick your brain for a few questions. Thanks in...
Don't think I require a whole lot . Woods have a good slope down to shack . Probably more to clear lines at end of day
I recently picked this pump up . Looking for information on what's needed to make this work. Any ideas ? What to use for a releaser .
I use a 12 volt fan from a car . Wired to three switches using the resistor switch for the heater blower . With a homemade adaptor into my draft opening. Using it now for six years works great had...
How much pressure do I darn apply . There is a ball valve on the to head of the vessel .the head is off in the picture as we have to drain and remove the membrane after each day to protect it from...
we are running a new this season filmtec BW30 which was recommended running pressure is 240 -250 pre filters are also new first one is a 30 micron and the second one is a 5 micron13681
looking for some input on what I'm doing wrong . we have a small commercial ro system that came out of a restaurant for there water . it's a 25x40 vessel with a procon pump. We have two pre filters...