I have an Atlas-Copco gv-100, is it necessary to run a regulator on the pump?
Type: Posts; User: dbeitz1891
I have an Atlas-Copco gv-100, is it necessary to run a regulator on the pump?
I bought a brand new pan washer from D&G, only have used it 3 times and the sprinkler heads have basically disintegrated. Using 3/4 gal of acid (myster pan) with about 20 gallons of water. Anyone...
They are $500, they're stainless with Teflon. So they'll handle up to 212 degrees. Most people seem to be using those diaphragm or even ones rated for 180 and they seem to be doing fine.18049
I picked mine up for $500. Thought that was a pretty good deal.
I'm picking up a yamada ndp-15 bst. That's the stainless model. I got a great deal on 3 of them. Anyone use them? I'd be willing to sell the other 2 since rebuild kits are readily available.
I'd love some help, my sample size would be much larger than 2. Woods "A" would have about 1,200 taps and woods "B" would have a little over 500. Laterals average nearly the same in length, number of...
The check valves I'm using are not spring loaded, they are floating diaphragms that remain open until closed. I will contact the company to make sure of this.
I understand the leak in the line...
I simply stated that because I did not want to put down Leader, in my opinion they do work just as well as check valve spouts. We had them installed last year and saw an increase in sap yield by...
There is inline check valves that are barbed in both 3/16 and 5/16 made by US Plastics. They are based out of Ohio. The operational range is between 1 and 27" of vacuum and have a cracking pressure...
Weather is looking a little better for next week. We are pulling the trigger, the taps will make the end of season now for sure. Good luck to all.
This is a picture of the discharge side of the RO. on the incoming i had two separate hoses, sap and then wash/permeate. The wash/permeate were plumbed in together and i had to change a valve to get...
https://www.google.com/url?sa=t&source=web&rct=j&url=http://www.nysmaple.com/files/The%2520Pipeline/PipelineSummer2015-FINAL.pdf&ved=0ahUKEwitl6v-n__WAhXG4IMKHcfrBJ0QFggvMAE&usg=AOvVaw3jZeYUyg4dsaL0Ak...
There have been multiple studies done on how many "inferences" and flow a 3/16ths line can handle. One study was done at a 12% slope and the flow vs T's maximum came up around 48. Other studies...
Hi Noel,
Doug Beitz here over in Attica. I have nearly 2,000 3/16ths all of them running into a mainline ranging from 3/4" to 1 1/4". I do have one or two individual 3/16 running into my tank to...
You must've gotten a good batch lol once fittings in, all said and done it still is up and looks fine but running it and then putting drops on was a nightmare. Really wasn't impressed with the...
When we first started we were using CDL but it would stretch so much you could hardly get fittings into it, that's if it stayed in the tool.... I had worked for a 20,000 tap operation and have never...
Jake, their new design which is already coming out has a more rigid back making it easier to get the 5/16 line on. I am a dealer for DSD and can help you guys with any ordering or other information...
That sounds awesome. What are you taking your concentrate too? And no we are doubling in size this year and then adding again next year. Hoping to be at 3,000 or more by 2019. For that reason were...
Hi everyone,
We're looking for information from current owners on their evaporator and RO. We're moving into a high efficiency woods arch and looking at a 1,200GPH RO. We're looking at the Leader...
Trees running good after that hard freeze and sap has cleared back up, as of this morning were at about 2 gal per tap from this run.
I'm thinking about letting this week slide so we can finish up stuff and then tapping the 15th and 16th. We went 13 weeks last year and the taps were still running when we pulled them
They look like red maples to me. Generally a lower sugar content and not as much sap as sugar maples but still produce.
Awesome, thanks for the info guys. I purchased one now just waiting for it to be shipped so we can get it plumbed in
I understand, I have an older arch so it's only one sided so what I fix to it can be somewhat more permanent. I think km going to go ahead and pull the trigger
Looks like a good unit, did you buy the valve assembly along with it? Seems a bit cumbersome on your unit.