is your end plate on right our wes fab has a bump that lines up with the rest of the plates?
Type: Posts; User: sdixon8
is your end plate on right our wes fab has a bump that lines up with the rest of the plates?
yeah already have a piggy back on our evap. that pre heats the sap.
if i run above 90 percent power draw it will burn more power but from 0 to 85 percent it will burn the same amount of fuel- 3/4 gallons an hour. i figured that i have about 20 to 25kw extra power...
while i was boiling yesterday. i couldnt help but think i am wasting power from our genset that runs the syrup shack, and thought for hours with what i could do with the extra power we were making....
i am pretty sure that that pin is a corner pin it is in the right area for a pin. i really have no reason to agree or disagree with his survey. that line hasnt be survyed in maybe 100 years or so....
it is about 1500 feet of tubing. i am somewhat good relations with him. he buy about 20 gallons of syrup a year from me when we are boiling. but he has comments when he is at the sugar house that...
when i layed out my tubing. i put the lowest mainline just above what i thought was the land line. their is a fence line for the land border and i am on my side of the fence. but one of our neighbors...
we put 6 by 6 larch post 3 foot in the ground and put and built a platform out of 4 by 6 larch works great and will last forever the only problem we ran into was that it sheared the nails for the...
just got a letter from patterson farms . 2.65 for light and med, 2.55 for dark, 2.40 b , 1.95 for c, and 1.50 for unfiltered c are the bulk prices their buyer is paying. and the guy down road across...
i just got off the phone with the dealer that buys my syrup bulk and he said the prices just came out a few days ago. they were 2.80 or light a med, 2.70 for dark 2.60 for b and 2 for com. and 1.50...
another boring one my name is scott dixon and 8 is the number of a super late model that i used to build engines for. we run tignit maple products which is located on the long four thirty dairy, and...
the ball we used was a ball for a dairy system it is designed to shut vacuum off if the trap becomes full. just make sure the ball is bigger than your pipe to the vac pump and make sure it is a hard...
i made mine out of pvc has less than 50 bucks in the whole thing the pipe that goes threw the top goes into a ways and it has a 2 inch ball from a local supplier. and it has a pipe threaded into the...
that looks awsome i would be interested in one
New York. 4000
Merry Christmas and happy holidays to all from all of us at Tignit Maple