I have not had a problem taking 3 or 4 40s to Bascom’s. They do require to call ahead to set up a dock time.
Type: Posts; User: wiam
I have not had a problem taking 3 or 4 40s to Bascom’s. They do require to call ahead to set up a dock time.
My cdl has a stainless Goulds feed pump. The plastic diffuser broke somehow a couple years ago. That gave me low pressure issues. Replaced diffuser and good as new.
https://supremewatersales.com/10sq05-160-96160140.html
Probably more pump than you need. I have this pump in an electric releaser. Pumps directly into 1600’ of 1” pipe, underground back to my...
First guess would be to take it apart and clean the valves. I sometimes have to do that with mine at the start of the season.
I have a 701 on my 3x12. I run 2-5.5 gph 80° hollow nozzles. About 125 psi. Nozzles are rated at 100 psi. So I’m actually burning a little over 12 gph. I built my arch. Tried several nozzle...
We use a square plastic freezer container and pour out the corner
We use pirate ship and put jugs in ziplock bags. USPS requires a bag on liquids
Have you checked or changed the filter inside the reclaimer?
We go to 235° for cream. Molded candy to 245°
Here are some I put in.
2277122772
Another vote for uniseals. I have used several on releasers. Have not had one not seal. Pretty forgiving on wobbly drilling. I boil them in water before installing. Makes them form to hole better. I...
Been washing drums (plastic 5s, Dr Pepper, 15 gallon beer kegs and 40 gallon drums) with that pump for about 4 shears. No problems so far
This is the pump I feed my washer with : ...
I use one similar to this : https://www.ebay.com/itm/223947956662?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=3qWHJ8NmQgS&sssrc=2349624&ssuid=kq8X0Ek2TzO&var=&widget_ver=artemis&media=COPY
So...
I run the same Warren pump as Dave on my 10 inch press. They were about $400 when I got mine. Now they are about $750. My next one will be this pump....
I usually do 1 part white to 2 parts maple. Have done 1 to 1. Works ok if it too humid. Usually mix just before use. Have tried straight maple. That makes a sticky mess. I use dark or very dark to...
https://leaderevaporator.com/content/Leader-Insulated-Oil-Arch.pdf
I would say these are starting points. When I built my 3x12 I tried several different size and pattern nozzles and pressures...
Wow. Not sure what to say. But you’re mostly wrong sir
I would be surprised if it did not have something growing in it before then. If I leave a tank it will have green in it by mid summer.
How far from grid power?
I have about 1000 taps. Ran a single vertical for years. 1600’ of 1-1/2 vac line. I ended up adding an old 80 gallon compressor tank at the releaser. Releaser recovered quicker after that. Ended up...
I was boiling about 2000 taps on a 2x6. ROing to about 16%. 2x2 front pan. Not reversable. Pretty sure it would not have helped to reverse that small a pan. After boiling about 3 hours it was time to...
I added a 4” pump chamber under my releaser and wired up relays and float switches to run the pump
https://supremewatersales.com/10sq05-160-96160140.html
That is the pump I use. Not big enough for you but this series pump is slow start and has low water and overheat protection built in. When...
Nothing fancy here. 1500’ vac line to woods is too small. Except for small (50 tap) new line I added this year newest drops are about 7 years old. Most of my 30p laterals are close to 20 years old.