Polyethylene is repairable with heat. Heat area until shiny and at the same time heat a small piece to blend into the crack. What caused the crack? If sun damage the plastic may be brittle and hard...
Type: Posts; User: K.I. Joe
Polyethylene is repairable with heat. Heat area until shiny and at the same time heat a small piece to blend into the crack. What caused the crack? If sun damage the plastic may be brittle and hard...
I pump 150 up and 1800 feet with a half horse. I get 5 gallons a minute
I have an 1100 gallon plastic tank to sell if you are interested. Paid over 800 new will sell for 600
To the best of my knowledge if you have city water you don't need a water test if you have well water you need to have the water tested every year. I need to have mine tested every year
So you need to keep your phone at the pumphouse. I have a router at the house, the pump house is 1800 feet away down a hill. It has cell service but no power. I would love to have a couple of cams...
Can someone explain exactly what and how this is working for a computer dummy. Does the hot spot send the video to your phone?
Really disappointed in how expensive it is. Wish it wasn't just another way to get your money but it sure seems like it is
Still working on the tank room. It is mostly sided, tanks are in place. Gonna wire up lights and outlets for heat tape next
I am with Perry family on this one. The price of bulk seems to be on the downward trend not upward and all indicators look like this will continue for some time
3.47 for 8 ounces!!!
Not very good hours for people who work monday thru friday.
MG 3x8 D &G is set up just like this. No problem at all. No inter problem, no level problem. Boil at whatever depth you want to. Only issue is it is harder to get a good boil in front bay of pan...
I usually make nothing. Lol a good thing I like doing it.
Can't wait to come check them out. Wish it was closer
There are two types of customers in my opinion. Price shoppers and people who don't care about the price. There is room for both out there. I am marketing to people who just want good syrup and don't...
Well done , nice video
Congrats to you
I didn't have much luck in getting parts for my evaporator from D&G...... good luck
Abbott I think you may be right , I saw the sap heading up the dry line and started to freak. I guess it would have to fill the main chamber to get to the pump. I am done for this year but I will...
Sounds like that may be my issue rhwells. My connection has the original but the piping is very rigid and sometimes forms a leak. How did you repair yours?
Also, when I Crack the drying to allow...
When the tanks switch the sap stays at the top chamber. Sometimes after a few seconds bubbles start to come up from the lower chamber and it drains other times it just holds right there.
My releaser seems to vacuum lock in the top chamber. The sap does not flow into the tank but hangs in the upper chamber and works its way to the pump. What would cause this. It didn't seem to do this...
I am making a mainline tool and was wondering what size threaded rod coupler nut you used on your for Tubing from 3/4 to 1.5 Inches. Thanks
I pump 1800 feet and 145 feet up with a deep well pump 1/2 horse and it works like a charm. Takes about 15 minutes to get to the top but works great.
Hello, did any of you get a sales break for a large order from Leader or other Manufacturers. If so what percent mark down. Please dont include the 10% spring break.