Salisbury Sugarworks 2012 NEVER GIVE AN INCH
What a day! Started tapping in boscowen.Had Dennis, Courtney, and Ray for a crew...got in around 700 (obviously none of us are Vermonters)...this is a woods that we had been throught and repaired not long ago and still we found extensive squirell damage....I went out to try to get the vacuum running around noon...after about an hour fired the faithful sp-22 up and...no vac...?!?!?...pump was making a funny noise so I tore the top off and the roll pin that makes the valve spin was gone??? had it going in another hour of wrenching...looked at the vac. gauge and....4"!!!!!!! WOOOO! Shut the valves between the releaser and the woods and got 27"...problems in the woods.. headed up the conductor line and herd hissing??odd...Freaking squirls chewd my dryline!! AHHH..fixed that up a littel and walked up the conductor line to the end shutting the lat. mainlines off so all the vac was on the last lat. mainline...vac. read 9"...as I shut that valve the vac dropped right off...LOTS OF LEAKS TO FIX!!! mind you this was during a better than average run...frustrating...as we walked back to the tank @ dark I could see a mist in the air around the vac. pump...sure enough the new last year Lapeirre double releaser had one of its lids turned enough so the float rod did not hit the rocker and shift sides (I WILL NOT BUY THAT MODEL RELEASER AGINE) my fault, but a poor desgine.. and the pump was sucking sap!!! Also my fault caus I did not have a moisture trap with squash balkl to prevent that (on list for today) threw the pump in the back of the puckup and ray and I worked on it till late..off to the woods agine.GIVE IT HELL!!!..MAY THE SWEET GODESS SMILE DOWN UPON YOU!!!