what do you look for when buying used ones? these had cooking oil in them, will it leach into the sap? I figure i'll have to clean them out good, and tips on what to use? thanks!
Printable View
what do you look for when buying used ones? these had cooking oil in them, will it leach into the sap? I figure i'll have to clean them out good, and tips on what to use? thanks!
Jim,
I bought a bunch of IBC totes as I use the frames to stack firewood into. I can then move wood into my basement with the tractor via a small overhead door.
Question was, what do I do with all these bladders. I put the word out and people were being them way cheaper than a conventional storage tank. Trouble they were running into was cleaning. These had a one time use at a baby formula factory holding organic fattening product. Extremely greasy and oily. A friend bought one and had no luck cleaning the tank. He brought it to me at work where I was able to use our hot pressure washer with water upwards of 212 or hotter degrees. We also used some mild plain bleach in the mix and after a solid half hour and a cold rinse with the garden hose, they came out spotless and orderless.
I used one myself this year and used the same method. Absolutely no residual issues whatsoever. Sap was crystal clear with no taste issues either.
Key here that I want to reiterate is the fact of how long I spent cleaning these to bring them to what I call new. The water being at boiling with the bleach was able to cut through and residual material left in the tank. I have a supplier so will be buying more of these for next year to set up my lines. This year we collected buckets and use the tote as a sledge. Hope this helps!
https://uploads.tapatalk-cdn.com/201...6d0e5e2738.jpg
Was able to find spigot set up at the hardware store that I used to make a draw system to go right into my preheater pan.
https://uploads.tapatalk-cdn.com/201...5285d4633c.jpg
Set it up on pallets to gravity feed.
https://uploads.tapatalk-cdn.com/201...ea29cd9384.jpg
In the back of my truck in the garage kept the sap in a cold area out of the sun.
https://uploads.tapatalk-cdn.com/201...f0ab315106.jpg
Final rinsing out. Note- when full these tanks have a ton of pressure behind the main valve!
Sent from my iPhone using Tapatalk
Also forgot the great use they are as firewood crates to move with a tractor or skid steer!
https://uploads.tapatalk-cdn.com/201...6e7f443144.jpg
https://uploads.tapatalk-cdn.com/201...e168f510dd.jpg
Sent from my iPhone using Tapatalk
Too late, you have already been bit!
thanks folks! I found some that had wine in them.. will have to try this cleaning out!
I cut a larger flap in the top of my toats so I can get in and clean if I need to that helps a ton.
I use HDPE 55 gallon drums for sap storage that had wine in them I now know that the "white wine" barrels clean out and the smell goes away but the "red wine" barrels hang on to that smell one barrel I have still has it after 4 years trying everything to clean it including a complete fill with bleach / water and soak for almost a week. JFYI Jay
Mead,
Do you remember where you got the reducing fitting at the tank outlet? I just bought a couple of Mauser totes with what looks like some kind of spin tight threads on the valve outlet. Definitely not IPS or NPT threads.
Thanks, Bill
I have found the same thing. The smell never leaves, i open them and look now. I used one for overflow and I never noticed anything different about my syrup in those batches. I done the same thing with bleach with the same results. There can't be much residue from the wine. Just goes to show there is nothing like new barrels. I only use barrels for temporary holding of overflow. The sap is seldom in them for more than a couple hours, as I boil that off first then start working my tote, that was bought new.Quote:
I use HDPE 55 gallon drums for sap storage that had wine in them I now know that the "white wine" barrels clean out and the smell goes away but the "red wine" barrels hang on to that smell