Filter press suction hose

What are you guys using for a suction hose on your filter press? Last year I used a silicone hose but it collapsed easily. Thanks.

What diameter were you using? I use a 1" silicone hose and the valves that feed it are full port 1" valves. Mine has not failed and it's been in use for 6-8 years. Are you pumping with a gear pump or air diaphragm pump? If air, slow the pump down a little.

I use the hose with the string in it

I use the same on my bypass hose, but not on suction nor pressure lines.

Milk hose. It is clear, usually with blue stripe, obviously food grade and thick wall so it doesn't collapse. They should have it at the FleetFarm in Hermantown.

Dave
I'm using an air diaphragm pump with 1/2" silicone tubing that collapses when the pump sucks. I have slowed it down but think I shouldn't have to if I have a different tubing.

Thanks for the info and discussion guys. I'll check with Fleet Farm.

Radio Silence.