Senior Project!!!

Ok you cant upload PDF's here either... So does anyone know how I can share the PDF files with you guys???

If you email me a copy I could put it on my server and then provide the link to download it if you like.


- Bryan

Its 26 pages and one page I am waiting for her to give to me...

I have e-mailed it to you maybe I just got an error, hang on I will try again

Okay... all 26 pages can be downloaded here (13 MB file);

Senior Project PDF

- Bryan

Bryan

Thank You!!!

I hope by sharing those papers, that those who did not believe we were doing a senior project, will help them see what she is doing and why...
It will also explain why she is doing it...
For the rest, you are more than welcome to stop by the Inn at 21 Sleeper Road in Sunapee, NH and take a look at the Progress that she has made...
Again Thank you all for your HELP and Support...

We picked up 800' of 3/4"NSF Poly Pipe today and hope to get it up tomorrow, the place we got it from had to order more so we have to wait until it shows up...

Thanks Again Bryan

No problem at all and if you need to post them online somewhere else just use this link;

HTML Code:

---

http://www.stonebriarfarm.com/imagehosting/senior_project.pdf

---

I'll leave them on my server for as long as you like and if you have additional pages you want merged into the file just let me know.

- Bryan Ex

Ok we tensioned 400 feet of tubing and tied it, Strung 400 feet and ran out so we did not tension or tie the last 400 feet

Ok we are trying to put up the 3/4" Mainline does anyone have a tool we can use to put the fittings in the tubing??? Or an easy way to get the darn things in there... We tried a thermos with boiling water but did not do the trick any other way???

Quote:

---

Originally Posted by U.S.M.C.Cpl

Ok we are trying to put up the 3/4" Mainline does anyone have a tool we can use to put the fittings in the tubing??? Or an easy way to get the darn things in there... We tried a thermos with boiling water but did not do the trick any other way???

---

I wish I could help you with a tool, but I have had luck trimming the inside edge of the pipe carefully with a knife to take off the square edge and then using a small torch to heat the pipe carefully. Then I use channel locks to push the fitting into the pipe carefully of course. And then finish off with the hose clamps.

Ok small torch we will give that a try...