.14/foot for 3/4
Printable View
.14/foot for 3/4
MATT
is that black water line??
RICH
wow that is a lot cheaper then im getting im getting 0.18/foot from home depo and .23/foot from Atkinson
Yup, black 100 psi waterline. Prices are very favorable.
I about (S.M.P.) S..... My Pants when I called to get some prices on pipe from some dealers. I just did it for kicks. Only Glenn was close on price, but still a bit more and alot further for me to go pick it up.
A drive to NH would have cost me about 1000 more for the same pipe I am buying.
Anyone got any leads on a stack thermometer that would read up to 1,200 or 1,400 degrees.
Brandon I don't know who you could get one from in your area, But I'm using a Pyrometer(exhaust temp.) gauge off of a wrecked dump truck. I need a new probe for mine, but it wrks great and is quite accurate.
Guys- This is a little update on my progress. Im going to try to finish my ro room/closet today. Ive got a little work on my line left, maybe a day and Ill have that done. Im pretty much to the point where Im just hooking things up. Ive got to get a permeate tank and thats all ive got left to bring home. I hope to have everything operational in two weeks. I should then be able to run the vac pump anc check everything and fire up the evap and play with the floats etc. If I get done a little early while its cold I may put a few more taps in. Should be somewhere between 1200 and 1250 on good vac right to the sugarhouse. Getting pretty excited to see what happens first good day at that releaser. Ill put some new pics on as soon as the inside of the sugarhouse is done. Should be soon. Good luck to everyone as they tap. A lot of people have expanded this year and itll be exciting to see how everyone does. Theron
TTHHHEEEERRRROOONNNNNNNNN- Got your dry lines in with valves to isolate leaks?,,Might not get much of a run on your first day,,takes a while for the trees to get going sometimes,,,looking forward to hear about your season as it unfolds,,,good luck,,
Theron,
The pics of your face that first day may be something to see also!!!!!
Matt usually I get my black plastic at Portland Plastic Pipe. I only needed about 500' and I had to get mineral blocks and Ivermec at TS. Portland Plastic Pipe usually has very good prices on poly tanks as well. Haven't checked for a couple years but they always did.
If anyone wonders about the black mainline. A few years back i grabbed 800' or so at Bascoms while I was there. I need a bunch more when i went to install it so I went to Portland Plastic. Same exact pipe the only difference was the manufacture time stamp.