PDA

View Full Version : Height 8" Membrane Tower


Amber Gold
12-05-2010, 06:35 PM
What's the overall height of an 8" membrane tower? I'm building an RO room soon and want to make sure I build it high enough. Where I'm building it, height will be a problem and I was going to build it to 6' interior height.

Thanks
Thad Blaisdell
12-05-2010, 07:11 PM
Without going down to measure.... a CDL tower is slightly higher than that. Within inches.
maplwrks
12-06-2010, 06:03 AM
Josh, Once again, without measuring, I think my tower is roughly 5' tall. I would assume that your 4" tower would be about the same. Thad is correct, his CDL towers are taller than the Lapierre.
Thompson's Tree Farm
12-06-2010, 07:17 AM
Just went and measured mine. CDL with top fittings is about 6 feet 2 inches and the LaPierre is about 5 feet 2 inches
Doug
Amber Gold
12-07-2010, 09:08 PM
Thanks Doug for the measurements. That's getting pretty tall. Is there any way to make it shorter and why the height difference? What is CDL doing differently? I have a 250 now, but am planning things for a 600 if I need one in the future.
Thad Blaisdell
12-08-2010, 04:49 AM
You know the theory..... Bigger is Better. LOL.... and no you can not make them shorter.... CDL.... unless you use a saw and hammer.
802maple
12-11-2010, 01:22 PM
The difference is the style of recirc pump used, which makes the CDL higher.
Amber Gold
12-12-2010, 10:16 AM
How much space do I need above the tower? Would a 7' clear height be high enough?
Thompson's Tree Farm
12-12-2010, 10:45 AM
Josh,
I think that would be lots. I tip mine on its side to get the membrane in and out. You could probably get away with about 6 inches of clearance above the tower. I think that I would consider a minimum of 6 feet 6 inches so you could keep your options open as to what brand you might choose in the future.
Doug
WMF
12-12-2010, 11:53 AM
On a trip to northern Vermont I saw some new lappiere machines with the membranes stacked horizontal.
maplwrks
12-13-2010, 06:14 AM
Lapierre has come ouit with a horizontal membrane cart---It has a wash tank and filter canisters attached to it. I like the concept, as my RO room is getting a little cramped. I would like the idea of rolling the rack out of the room in the off season. If I remember--the price tag is a little high!!