Delaval 74

[rbross]

Looking for info on a Delaval 74, anyone using one, if so what level hg can you get? This year ran a Gast 2067 oilless with 300 taps at 22" hg.
Thanks for any info.
Rich

[Haynes Forest Products]

I have until I fried it due to operator error:emb: What type of info are you looking for. Why the change from the Gast if your getting 22HGs?

[Haynes Forest Products]

I have until I fried it due to operator error:emb: Im pulling 24 when everything is working good in the woods I do have flood oil so it does run cooler and I dont use a regulator so it at full vac and HGs.What type of info are you looking for. Why the change from the Gast if your getting 22HGs?

[rbross]

A friend of mine was given the 74 and we're looking for information for him, recommended rpm's, vac and cfm numbers. I'll stay with the Gast, its a great pump and oilless.

[arcticmaple8]

delaval rpms on these pumps should be around 1500-1600 which means a slightly larger pulley on pump and smaller on motor, cfm will depend on motor size probably around 50-60cfm @ 15 in with 5hp motor with good oil flow, short exhaust and open air flow around unit should be around 20" continous but cfm will drop some

[Haynes Forest Products]

Dang that sounds high on the RPMs My Delaval had 540 RPM recommendation. Dont remember what unit was.