View Full Version : direction of membrane in stainless vessel
chrisnjake9
03-02-2010, 10:44 PM
i bought 2 stainless vessels off ebay and 2 nf270's from Atlantic ro was wondering what direction the membranes go in the tubes on one is a seal the other dose not
Russell Lampron
03-03-2010, 05:14 AM
The end with the seal goes at the end of the vessel where the raw sap goes into the vessel.
DanE.
03-03-2010, 06:38 AM
i bought 2 stainless vessels off ebay and 2 nf270's from Atlantic ro was wondering what direction the membranes go in the tubes on one is a seal the other dose not
are you making your own RO?
Dane.
chrisnjake9
03-03-2010, 06:57 AM
yes dan im finished ill be posten pics soon
trackerguy
03-03-2010, 07:01 PM
either way works fine, usually place the seal so it goes into the housing last, much easier, otherwise it doesn't matter, that seal only needs to hold the membrane diff pressure, which is under 10 lbs usually if you're within the flow guidelines.
Powered by vBulletin® Version 4.1.7 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.