PDA

View Full Version : Filtrate/Permeate tank material



Homestead Maple
01-18-2010, 06:36 PM
I'm thinking of getting a larger tank to store my filtrate/permeate in and I have a chance to get a 1,500 gal. round bottom, galvanized tank for a reasonable price but I've been told by someone that the filtrate/permeate will strip the galvanizing off the tank. Is this true? I thought I was just working with filtered water once the sugar was removed from the sap.

Thompson's Tree Farm
01-18-2010, 07:00 PM
I'm no expert, but my understanding was that permeate is about as close to distilled water as you can get without distilling it. It shouldn't do anything to galvanizing.

maplwrks
01-18-2010, 07:08 PM
Doug is correct---buy it!! Rinsing with 1600 gallons of permeate will also be good for your membranes.

smitty76
01-18-2010, 07:26 PM
I am no expert either but I agree with Doug. If the price is right buy it.



Smitty76

Smitty
01-18-2010, 07:28 PM
I am no scientist or professor, but distilled water is lacking minerals, which
can make it somewhat corrosive (mineral hungry). you should be just fine
with galv, just keep an eye on the lap joint seems and rivets.

smitty76
01-18-2010, 07:37 PM
well Smitty, I see you have made Enthusiast

Homestead Maple
01-19-2010, 08:59 PM
Thank you for the replies. I'll use the galvanized tank.

maplwrks
01-20-2010, 08:30 AM
Permeate is not the same a distilled water--distilled water will dissolve and soften nitre. Permeate is great for cleaning, but doesn't have the makeup to dissolve minerals.

Brent
01-22-2010, 10:22 PM
I am no scientist or professor, but distilled water is lacking minerals, which
can make it somewhat corrosive (mineral hungry). you should be just fine
with galv, just keep an eye on the lap joint seems and rivets.

Hmmm rain water has almost no impact on a car but salt water rust the heck out of them.