SUGARSMITH
12-17-2004, 12:02 PM
Here is my situation. I need to supply a dry vacumn line to a releaser that is about 1500 feet from my vacumn pump. After the releaser there is an additional 1500- 2000 feet of mainline that is already on a gravity system with about 1500 taps, Was setup a few years ago and never used.
For the dry line to the releaser I am considering 1-1/2 or 1-1/4 black poly pipe. What are the general thought, I would like to save the $$$ with 1-1/4 but do not want to do it twice.
For the dry line to the releaser I am considering 1-1/2 or 1-1/4 black poly pipe. What are the general thought, I would like to save the $$$ with 1-1/4 but do not want to do it twice.