Tmeeeh
02-05-2009, 05:40 PM
I use a Leader Springtech Elite 800 RO rated at 700 Gph. It is 8 years old, and is slowing down. We will be concentrating to 12% to 14%. I think it will be OK through this season but I want to be ready to replace the membrane if needed. The machine was made by Ariblo for Leader. Now Dominion and Grimm makes them. The membrane in it is a fluid systems TFC 8931S-600 8”X60”. Most ROs use 8”X40” or 4”X40” membranes. Neither Leader or Dominion and Grimm sell 8”X60” membranes now. They recommend one and one half Filmtec Mark 1 8”X40” membranes assembled together and installed in the 8”X60” vessel to the tune of $3,200! Or replace my 60” vessel with an 80” vessel and use two Hydronautics PVD1 membranes in it.
Joe at Atlantic RO www.formembranes.com will sell a Filmtec NF-90 8”X40” for $777 and a two foot spacer for $50. That would probably flow around 500Gph.
KOCH membrane systems made the original membrane in my machine and now sells what they say is a newer version of the same membrane a TFC 9833S-575 8”X60” for $900. They say they sold these to Airablo before D&G and to other maple producers in Maine and Vermont for use in their ROs.
Does anyone here have experience with KOCH or replacing 8”X60” membranes?
Tim
Joe at Atlantic RO www.formembranes.com will sell a Filmtec NF-90 8”X40” for $777 and a two foot spacer for $50. That would probably flow around 500Gph.
KOCH membrane systems made the original membrane in my machine and now sells what they say is a newer version of the same membrane a TFC 9833S-575 8”X60” for $900. They say they sold these to Airablo before D&G and to other maple producers in Maine and Vermont for use in their ROs.
Does anyone here have experience with KOCH or replacing 8”X60” membranes?
Tim