TheNamelessPoet
01-30-2022, 07:53 PM
OK so, you guys make stuff from scratch, so I figure this is the place to ask.
I am looking for an inline ball valve / shutoff type to use with some tubing. I have a stainless container that just has a barb type fitting on the bottom. I want to put a piece of tubing on that, then an inline valve or shutoff, then some more tubing, to try and harness the flow into my warming pan. I used the micrometer on the barb that is already there and it is 7/16". I have LOTS of 5/16 tubing I was HOPING to use for this little project.
Any idea how to do this, or where to find this type fitting. everything I find is threaded or has 1 side barb and 1 side thread.
https://www.amazon.com/Beduan-Stainless-Splicer-Coupler-Fitting/dp/B07P2DLBPC/ref=sr_1_26?crid=1ND8KTO91WMIM&keywords=3%2F8+stainless+steel+valve+barb&qid=1643590285&sprefix=3%2F8+stainless+steel+valve+bar%2Caps%2C25 2&sr=8-26
but with a ball valve (or something like it) in the middle.
I am looking for an inline ball valve / shutoff type to use with some tubing. I have a stainless container that just has a barb type fitting on the bottom. I want to put a piece of tubing on that, then an inline valve or shutoff, then some more tubing, to try and harness the flow into my warming pan. I used the micrometer on the barb that is already there and it is 7/16". I have LOTS of 5/16 tubing I was HOPING to use for this little project.
Any idea how to do this, or where to find this type fitting. everything I find is threaded or has 1 side barb and 1 side thread.
https://www.amazon.com/Beduan-Stainless-Splicer-Coupler-Fitting/dp/B07P2DLBPC/ref=sr_1_26?crid=1ND8KTO91WMIM&keywords=3%2F8+stainless+steel+valve+barb&qid=1643590285&sprefix=3%2F8+stainless+steel+valve+bar%2Caps%2C25 2&sr=8-26
but with a ball valve (or something like it) in the middle.