adk1
03-12-2021, 09:40 PM
have an older springtech micro elite that i sold to a friend. a few weeks ago i helped him get it ready for the season did a rince, wash, rinse etc. noticed that the high pressure pump was leaking some. called leader and they sent a gasket to be replaced. my friend disconnected the wiring and pulled the pump apart replacing the gasket and back together again. this am went to assist in concentrating some sap. get it all hooked up and ready to go. turn on pressure pump and sap fills. hit the high pressure pump button and the light comes on but the pump does not start. checked the connections all seem good. had taken a pick before dissambly so all back together the same. tested power at the wiring and it appears there is power, not sure whay the oump is not firing up?. thanks for any help i may get.