Cdl extractor cleaning and lube...

[butler]

Just a question for any guys with the cdl extractor... the one that’s good for 750 taps... it got a push tube in the top section but it’s extremely hard to clean or lubricate.. just wondering if there is a way to take it apart to clean and lubricate it...

[VT_K9]

I believe you are talking about the large blue tube with bolts running parallel? Take the bolts apart. If you are talking about the "plunger" in the tube which attached to the blue tube then it will unscrew. You'll want to clean and lube in there. I'm on the road and not near any good schematics. There is a way and I did that last year. I will likely do it again this year. Probably should be done every year.

Mike

[butler]

Perfect, I will give that a try