View Full Version : mueller milk tank
hard maple
12-22-2007, 08:19 AM
I picked a used mueller 150 gal milk tank
The drain fitting is a flat flange that takes a o-ring
I need to find a clamp (and valve)that fits onto this flange
Does anyone have any suggestions???
jemsklein
12-22-2007, 08:45 AM
i sthere you could send me a picture of the tank and the fitting and i will let you know
hard maple
12-22-2007, 05:49 PM
ok
I uploaded a couple pics on my photo page if that helps anyone.
Sugarmaker
12-22-2007, 07:56 PM
Hard Maple,
(sorry for hijacking the thread) I knew I had seen the arch on the wall somewhere. Your pictures of your arch and the "new" doors is what gave me the idea when I came across the old arch at my uncles while deer hunting. Your arch is very swoopy and curvy. I would like to find doors and the makers name for mine, but at this time, I don't have a clue.
Regards,
Chris
VT maple maker
12-22-2007, 08:35 PM
Hard Maple,
I work for a dairy processing plant here in VT and that looks like a 1.5" flange gasket to me. I think we use De-Leval gaskets at work but there is a place that i believe will have everything you need. They even deal with Mueller tanks. Here is there website,
www.brunsbros.com
These guys do a great job from what ive seen, they have done a lot of custom fabrication for us and the quality is very good. Good Luck.
VT maple maker
12-22-2007, 08:50 PM
This is what the gasket you will need looks like.
gmcooper
12-22-2007, 11:01 PM
The www.partsdepotonline.com should also have the fittings. They are dairy equipment supply company.
hard maple
12-23-2007, 07:54 AM
Thanks for the leads, guys
Chris, that is a unique arch you have, nothing like I've ever seen.
Mounting it in the wall is just an idea I got from another sugarmaker.
brookledge
12-23-2007, 01:47 PM
Is it 1 1/2" triclover? It looks like it.
Keith
Powered by vBulletin® Version 4.1.7 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.