What treatment for outside of sugar shack?

[raptorfan85]

I'm currently in the process of building my new sugar shack! (Photos to follow) 3 years outside was enough for me. My father has a band saw Mill and we cut all the lumber from the property. It's all white pine. I was wondering if I should put some kind of sealer or water treatment on the outside? If so does anyone have any recommendations?

Thanks Jake

[MapleCamp]

I use TWP on all my out door builds. I cut mostly balsom , hemlock , spruce , and pine . Have had very good results.

[mudr]

My first coating was Flood CWF and I just re did it with Flood CWF UV5, which is supposed to last longer. Pretty pleased with the looks. Kinda wish the first application lasted longer but I probably should have hit it with two coats being virgin wood.

[buckeye gold]

The two water proofers mentioned are both good. The best part is you can put them both on with a pump up garden sprayer. I also used Sherwin Williams super deck, but it's pricey and is opaque colors

[heus]

I like to use Behr solid color stain.

[Maplewalnut]

It all depends if you want maintenance or not and in some cases what wood you used. As others have said, routine application of such products is necessary or its wasted money. My feeling is barns have withstood weather for years and years without weatherproofing. If your siding is off the ground and breathes on both sides of the wall then it will last as is for many moons!! I have hemlock board and batten siding with some pine and other than the natural 'greying' color, there is no rot or flaking 15 years later. 75% of my siding wood was stacked and stickered for 9 months but when I ran out I nailed green wood to finish again , no difference seen.

Good Luck

[ducxsterdoo]

I just put the Flood CWF UV-5 on my hemlock board and batten sugar shack...very happy with the results. I used a sprayer and recoated within 15 minutes per the instructions, and it went on even, and looks great. No idea what to expect for longevity, but of all the transparent/semi-transparent stains I've used over the years, this one is probably my favorite.

-craig

[mudr]

Here pics of my UV5 going down on my highly faded south wall that had one coat of regular Flood CWF a few years ago. The other walls were not that bad. I sprayed on and backbrushed in. 6 gallons did one coat this time. Think I used 8-9 gallons a couple years back on unfinished wood. 16x24, 10 ft walls.https://uploads.tapatalk-cdn.com/20190830/3510b9410b555b32ef4daaf5bf8dfc37.jpghttps://uploads.tapatalk-cdn.com/20190830/f6cbc4a620033f9661915a8498b2e0c4.jpg

Sent from my SM-G935V using Tapatalk

[raptorfan85]

Here pics of my UV5 going down on my highly faded south wall that had one coat of regular Flood CWF a few years ago. The other walls were not that bad. I sprayed on and backbrushed in. 6 gallons did one coat this time. Think I used 8-9 gallons a couple years back on unfinished wood. 16x24, 10 ft walls.https://uploads.tapatalk-cdn.com/20190830/3510b9410b555b32ef4daaf5bf8dfc37.jpghttps://uploads.tapatalk-cdn.com/20190830/f6cbc4a620033f9661915a8498b2e0c4.jpg

Sent from my SM-G935V using Tapatalk

I really like the way that looks. So you just spray it on with a garden pump sprayer and then brush it in? Sounds pretty easy. Maybe I'll give that stuff a try.

[mudr]

Well I had a wagner sprayer handy so I used that. I can't comment on a pump sprayer, I assume it will work.

Back brushing did help though. When first sprayed, the finish seemed to sit on top of the surface. The brush really worked it in.

Sent from my SM-G935V using Tapatalk