rob
03-17-2004, 01:09 PM
Hi Folks,
New to the Forum, fairly new to sugaring, and full of questions! My wife and I got a new place a couple of years ago in Huntington Vt. It has a really nice section of Mature sugar bush on it. Last year we did the pans and cinder blocks thing and had a blast. This year we expect to do the same, but want ot make the next year a little more serious. Fortuantly, the previous owner built a nice sugar house, unfortuantly he took the rig and all gear with him. He was doing about 300 taps (mostly tubing), and in a few years it would be possible to add alot more (younger stuff coming up) We are planning on fewer taps (50-100) and all on buckets with a few collection points, we just don't want the tubing up to see all year as The mature section is also our "backyard".
So here coime the questions:
1-Has anyone come up with an estimated ratio of taps to cordwood consumed (mixed species hard and soft)? I ask because we want to run our rig on wood. we also heat the house and shop with wood. The previous owner also fueled his rig with wood. It is only a 20 acre lot and he picked it pretty clean. Thus we suspect that our available firewood supply may well be the limiting factor on the number of taps we run, as we do not want a pleasent hobby to have a negative impact on the wood lot..looking for a sustainable balance here. Certainly there is alot of thinning to be done...but that's another story.
2-What are "average" tap ratings for a 2X4 rig...a 2X6? I know production varies bush to bush and year to year but lets try for rough numbers. we suspect these would be the approite size evap. for us to get.
3-As I look around for a used evaperator, What are some things to be on the lookout for?Both positive and negative.
4- Returning to the bush itself. Is there good info source on managing the lot for sugaring?...Regarding stand density, species diversity, targeted thinning, that sort of thing. As I said before a good size area is just coming into production size but needs some attention
Well, that's probobly enough for now, but I am sure I will be back with a lot more questions. Thanks for any help or advice.
Rob
New to the Forum, fairly new to sugaring, and full of questions! My wife and I got a new place a couple of years ago in Huntington Vt. It has a really nice section of Mature sugar bush on it. Last year we did the pans and cinder blocks thing and had a blast. This year we expect to do the same, but want ot make the next year a little more serious. Fortuantly, the previous owner built a nice sugar house, unfortuantly he took the rig and all gear with him. He was doing about 300 taps (mostly tubing), and in a few years it would be possible to add alot more (younger stuff coming up) We are planning on fewer taps (50-100) and all on buckets with a few collection points, we just don't want the tubing up to see all year as The mature section is also our "backyard".
So here coime the questions:
1-Has anyone come up with an estimated ratio of taps to cordwood consumed (mixed species hard and soft)? I ask because we want to run our rig on wood. we also heat the house and shop with wood. The previous owner also fueled his rig with wood. It is only a 20 acre lot and he picked it pretty clean. Thus we suspect that our available firewood supply may well be the limiting factor on the number of taps we run, as we do not want a pleasent hobby to have a negative impact on the wood lot..looking for a sustainable balance here. Certainly there is alot of thinning to be done...but that's another story.
2-What are "average" tap ratings for a 2X4 rig...a 2X6? I know production varies bush to bush and year to year but lets try for rough numbers. we suspect these would be the approite size evap. for us to get.
3-As I look around for a used evaperator, What are some things to be on the lookout for?Both positive and negative.
4- Returning to the bush itself. Is there good info source on managing the lot for sugaring?...Regarding stand density, species diversity, targeted thinning, that sort of thing. As I said before a good size area is just coming into production size but needs some attention
Well, that's probobly enough for now, but I am sure I will be back with a lot more questions. Thanks for any help or advice.
Rob