blower for 2x3 arch

[Woodtick4]

where can I find a good blower for my homemade 2x3 arch? the back side of my sleeve for my ash pan is about 4 inches square. not sure what size I need.

[ecolbeck]

I’ve used this blower on a smalll arch and it worked great.


Dayton 1TDP7 Rectangular... https://www.amazon.com/dp/B000BK43IY?ref=ppx_pop_mob_ap_share

[buckeye gold]

Hit flea markets, yard sales, second hand stores. I found two for like$10.00 to $15.00 each. I use an old leaf blower I wired direct to a variable speed control. This is my second one, I get about two years out of them. At ~$10.00 bucks you can afford to run them into the ground. I used Pvc pipe and fernco fittings to adapt them. They are all you need on small units.

[Cjadamec]

On my OTE I use a 6" in-line duct fan and I added a plug in rheostat to control fan speed. It was cheap and it works.

6 inch Inline Duct Booster Fan 240 CFM (https://www.amazon.com/dp/B01C82SZRM/ref=sspa_dk_detail_1?psc=1&pd_rd_i=B01C82SZRM&pd_rd_w=gcweD&pf_rd_p=f0dedbe2-13c8-4136-a746-4398ed93cf0f&pd_rd_wg=bCUOV&pf_rd_r=RGKNSXAHVK85WZSCEX7R&pd_rd_r=672dd979-2614-11e9-8fda-23ec39d64fe3)

control fan speed (https://www.amazon.com/iPower-Exhaust-Controller-Adjuster-Inline/dp/B0714FFG4F/ref=pd_bxgy_328_2/140-5051410-7259507?_encoding=UTF8&pd_rd_i=B0714FFG4F&pd_rd_r=83a65cc4-2614-11e9-af28-13b30478bfa1&pd_rd_w=TmUVe&pd_rd_wg=nzIW9&pf_rd_p=3f9889ac-6c45-46e8-b515-3af650557207&pf_rd_r=WFVSDJ1VRG3N85NBKJS3&psc=1&refRID=WFVSDJ1VRG3N85NBKJS3)

[Woodtick4]

Thanks for all the info guys.....I think I'll give the Dayton blower a try