Stack?

[Green mtn maple]

Anyone use metalbestos for stack. ?

[wnybassman]

I think I do. This is what I used. We reclaimed it in a remodel job and it was in awesome condition. Stainless inner sleeve and galvanized exterior.


19177

[Green mtn maple]

I have limited room for my stack. Trying to keep it safe at the roof penetration off combustible .

[HondoLane]

I just went with metalbestos from Menards. Paid like $65 section (3’) for Class A Stainless. My stove pipe is 6” inside diameter 8” outside and rated for 2” clearance. Went with 4 section plus my base stack and I’m close to 18’ total.

[Green mtn maple]

I have 8’ of 8” I.D. On hand. I need about 4-5 more feet. I’ve never tried using it for my stack in the past we always used 8” single wall. 12’
I’ve done some renovations to the sugarhouse and I think I need a better rated option
I just haven’t seen any metalbestos on sugar rigs
Pat

[ecolbeck]

I’ve been using 8” metalbestos for two years now. Works great.

[bigschuss]

Anyone use metalbestos for stack. ?

Yes...about 18' of metalbestos for about 5 or 6 years now. Works great.

19185

[VT_K9]

For the last two years we used metalbestos for our 2x6 due to the clearance in a very old shack. It worked well. We bought a stainless steel stack piece from the evaporator to the 10" metalbestos. We used a thermometer in the adaptor to check the stack temps. We never brought ours to the rated highs of the metalbestos.

Mike

[Green mtn maple]

Thank you for all the replies. I’m 4’ short if desired length. I’ll just have to pick up one more piece.