PDA

View Full Version : stainless quick fitting to pvc.



cjf12
01-07-2018, 05:04 PM
How are you guys going from stainless quick fittings used on dairy releasers to pvc. My ro inlet is this
17018
And i would like to transition to pvc.
I v
Have the gasket and clamp but not sure what will connect on.

Bricklayer
01-07-2018, 05:33 PM
They are called sanitary fittings or triclamp.
I've bought all mine on amazon but eBay has good prices on them too
This is what it looks like you might be able to find a female adaptor instead of a male. You'll need a clamp and asked too. Not sure what size your fitting is.
https://www.amazon.com/Stainless-Sanitary-Threaded-Ferrule-Fittings/dp/B0739YD796/ref=sr_1_20?ie=UTF8&qid=1515364213&sr=8-20&keywords=Triclamp+sanitary+npt

cjf12
01-07-2018, 05:42 PM
Awesome. Thanks bricklayer. Trying to build a sugar shack, learn how to run an evaporator, an ro, and re string 3/16 in my bush I feel like my head is spinning.

cjf12
01-07-2018, 06:01 PM
OD of flange is 2". ID is just shy of 1 1.5 inches. I am assuming I need 1 1.5 tri clamp fitting.

maple maniac65
01-07-2018, 06:22 PM
I have three milk tanks and for the past 12 years all I have had is a plastic nipple inside the ss nipple and a rubber fernco hose fitting clamped on. Never once have they slipped off.