Spring tech micro elite 160GPH aRO

[adk1]

Can anyone provide any information as to what the recommended diameter of hose should be for the pipe feeding the ro, and the two additional lines one going to permeate tank and the other going to the concentrate tank. I am going to be using flexiable hose. I would assume that I will need to use hose that will not collapse for the sap intake.

[wiam]

1/2" should be fine for outs. I would use the same size as what is on the machine for in.

[Ryan Mahar]

I have springtec 600. 1 1/2" feed with 1" going to concentrate and 1" to permeate....that was the sizing recommended....also it is the size of the incoming connections and out going connections... so if you match what the machine has I would think that would be safe..........

[adk1]

Thanks for the replies. 1" intake and 1/2" to concentrate and permeate from what I can tell. Came with banjo fitting connections installed. I bought it used.