PDA

View Full Version : Tapped to close



Tickle
02-07-2017, 07:35 AM
Question on tapping, yesterday I put a new tap in what I thought was a new tree that I had never tapped after putting in the tap realized I had tapped the new tap only 2" away from a old tap last year , not sure how I didn't see it , but wanted to know the ramifications of my screw up

psparr
02-07-2017, 07:48 AM
If you hit white wood you'll be ok. If it was all stained you could probably get away with tapping it again.

DrTimPerkins
02-07-2017, 08:03 AM
Question on tapping, yesterday I put a new tap in what I thought was a new tree that I had never tapped after putting in the tap realized I had tapped the new tap only 2" away from a old tap last year , not sure how I didn't see it , but wanted to know the ramifications of my screw up

More information needed. Are you on gravity or vacuum? The new taphole is 2" away from the old one, but is it above or below, or off to one side? Did you see any brown (stained) wood when you tapped it?

Tickle
02-07-2017, 09:39 AM
drop line into 5 gal bucket and it is to the side of it , wood was white

DrTimPerkins
02-07-2017, 09:45 AM
drop line into 5 gal bucket and it is to the side of it , wood was white

Should be fine.

Tickle
02-07-2017, 02:24 PM
thanks i was hoping that it wasn't a problem