SS sweep fitting

[Urban Sugarmaker]

I am having real trouble finding a SS sweep 90 elbow spout with 1/2" MPT threads and just a spout opening on the other end. I have a 1/2" SS ball valve for my bottler and I want the spout. Anyone know where to find one like the ones Leader has available for their canners? I don't want to pay $25 for valve and spout when I already have the valve.

[BAP]

Bascom's has one I suspect other maple suppliers might.
https://www.bascommaple.com/item/vssdnoz05/valves_and_fittings/

[brikel]

i ordered some fittings for my pans from Hamby dairy supply. prompt surface and shipping.. Not sure they'll have what your looking for but you can try. lots of new and used fittings. Here's their web site

http://www.hambydairysupply.com/xcart/

[maple flats]

You might want to consider a 1/2 x close SS nipple then a 1/2 SS 90. After that you can use 1/2 x barb adapters and you may like 2 or 3 sizes. As you draw off, the smaller the container you are filling the smaller the final outlet may want to be.
However, in my set up I use a foot operated bottling valve ( http://www.mapleguys.com/product/HFBS.html ) with just 1 size outlet. Before that valve I have a ball valve that regulates the flow rate, that method also works well and is faster to change flow than switching outlets.